Danby DPAC90061 Air Conditioner Manual

The Danby DPAC90061 is a portable air conditioner designed for cooling spaces up to 450 square feet. It features a 9,000 BTU cooling capacity, a dehumidifier function, and a programmable timer. The unit is equipped with a remote control, adjustable fan speeds, and a washable air filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable fan speeds, dehumidifier function, washable air filter.

Feature	Description
Cooling Capacity	9,000 BTU for spaces up to 450 sq. ft.
Dehumidifier Function	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off at specific times.
Adjustable Fan Speeds	Customize airflow to your preference.
Washable Air Filter	Easy to clean for optimal performance.

Installation

Unpack the unit and inspect for any damage. Place it near a window for easy venting.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach one end to the air conditioner and the other to the window kit.
Plug into a power outlet: Ensure the outlet is grounded and rated for the unit's power.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit and follow the remote control instructions.

Select cooling mode: Use the mode button on the remote.
Set desired temperature: Adjust using the temperature buttons.
Choose fan speed: Select low, medium, or high based on your comfort.

CAUTION! Ensure the air filter is clean before operation.

Specifications

Cooling Capacity: 9,000 BTU.
Coverage Area: Up to 450 sq. ft.
Power Supply: 115V/60Hz.
Air Flow: Adjustable fan speeds.
Dehumidification: Up to 1.5 pints per hour.
Noise Level: 52 dB on low setting.
Dimensions: 29.5 x 17.5 x 14.5 inches.
Weight: 70 lbs.

Controls and Settings

Access settings via the remote control or control panel on the unit.

Remote: Power, Mode, Temperature, Fan Speed, Timer.

Settings include temperature adjustment, fan speed selection, and mode changes (cool, fan, dehumidify).

Connecting Devices

Ensure the unit is properly vented to the outside for optimal performance.

Turn off the unit before making any adjustments.
Ensure all connections are secure and free from leaks.

Tip: Regularly check the exhaust hose for blockages.

Operating the Air Conditioner

Follow the remote control instructions for operation.

Turn on the unit: Press the power button on the remote.
Select cooling mode: Choose the desired mode for operation.
Adjust temperature and fan speed as needed.
Use the timer function for scheduled operation.

WARNING! Do not block air intake or exhaust vents.

Accessibility Features

The remote control is designed for easy access and operation for all users.

Care & Cleaning

Unplug the unit before cleaning. Use a damp cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Ensure the air filter is cleaned regularly for optimal performance.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Improper installation	Check window kit and exhaust hose connections.
Remote not working	Batteries	Replace batteries in the remote control.
Water leaking	Full water tank	Empty the water tank and check for blockages.
Noise during operation	Loose parts	Check for loose screws or components.

Reset: Unplug the unit for 5 minutes to reset.

Service: For assistance, contact Danby customer service.