Danby DPAC8020 Air Conditioner Manual

The Danby DPAC8020 is a portable air conditioner designed to provide efficient cooling for spaces up to 350 square feet. It features a 3-in-1 functionality, offering cooling, dehumidifying, and fan modes. The unit is equipped with a remote control, programmable timer, and adjustable thermostat for optimal comfort. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, Remote Control, Programmable timer, Adjustable thermostat, 3-in-1 functionality.

FeatureDescription
Cooling capacity8,000 BTU, suitable for rooms up to 350 sq. ft.
Dehumidifying functionRemoves excess moisture from the air.
Fan modeCirculates air without cooling.
Remote controlConvenient operation from a distance.
Programmable timerSet the unit to turn on/off at specific times.
Adjustable thermostatCustomize your comfort level.
Easy installationIncludes window kit for quick setup.
Compact designEasy to move and store.

Installation

Unpack and inspect contents. Place the unit on a stable surface near a window.

  1. Install the window kit: Follow the instructions to fit the kit into your window.
  2. Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
  3. Plug into AC power: Ensure the unit is plugged into a grounded outlet.

WARNING! Ensure the unit is stable to avoid tipping. Follow all safety instructions.

First-Time Setup

Power on the unit; follow the remote control instructions.

  1. Set the mode: Choose between cooling, dehumidifying, or fan mode.
  2. Adjust the temperature: Use the remote to set your desired temperature.
  3. Set the timer: Program the unit to turn on or off at specific times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Controls and Settings

Access settings via the remote control. Front panel includes power, mode, and temperature controls.

Remote: Power, Mode selection, Temperature adjustment, Timer settings.

Cooling: Adjust fan speed and temperature settings for optimal comfort.

Connecting Devices

No additional devices are required for operation. Ensure the unit is plugged into a suitable power outlet.

  1. Turn off the unit before connecting or disconnecting the exhaust hose.
  2. Ensure all connections are secure and properly fitted.

Tip: Keep the area around the unit clear for optimal airflow.

Operating the Air Conditioner

To operate, use the remote control to select your desired mode and temperature.

  1. Press the power button to turn on the unit.
  2. Select cooling or fan mode as needed.
  3. Adjust the temperature to your comfort level.
  4. Use the timer function to schedule operation times.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The remote control is designed for easy access and operation. Ensure visibility to the unit for optimal remote functionality.

Care & Cleaning

Unplug the unit before cleaning. Use a soft, dry cloth to wipe the exterior.

CAUTION! Do not use liquids or aerosols; keep away from heat sources.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit does not turn onNo powerCheck power outlet and connections.
No coolingIncorrect settingsEnsure unit is set to cooling mode.
Excessive noiseObstructionCheck for blockages around the unit.
Water leakageFull tankEmpty the water tank as needed.

Reset: Unplug the unit for 10 seconds to reset.

Service: 1-800-263-2629; www.danby.com

Danby DPAC8020 Air Conditioner Manual © - All Rights Reserved 2026