Danby DPAC7297 Air Conditioner Manual

The Danby DPAC7297 is a portable air conditioner designed for efficient cooling in small to medium-sized rooms. It features a 7000 BTU cooling capacity, a dehumidifier function, and a programmable timer. The unit is equipped with an easy-to-use remote control, adjustable fan speeds, and a washable air filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable fan speeds, dehumidifier function, washable air filter.

Feature	Description
7000 BTU Cooling Capacity	Efficient cooling for rooms up to 300 sq. ft.
Dehumidifier Function	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off at specific times.
Washable Air Filter	Easy to clean and maintain for optimal performance.
Adjustable Fan Speeds	Customize airflow to your preference.

Installation

Unpack the unit and inspect for any damages. Place the air conditioner near a window for easy venting.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach one end to the air conditioner and the other to the window kit.
Plug into a power outlet: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure proper ventilation to avoid overheating. Do not block the air intake or exhaust.

First-Time Setup

Power on the unit and follow the remote control instructions.

Select cooling mode: Use the mode button on the remote to choose between cooling and dehumidifying.
Set the desired temperature: Adjust using the temperature buttons on the remote.
Program the timer: Use the timer function to set when you want the unit to turn on or off.

CAUTION! Ensure the unit is on a stable surface to prevent tipping.

Specifications

Cooling Capacity: 7000 BTU.
Room Size: Up to 300 sq. ft.
Power Supply: 115V, 60Hz.
Air Flow: Adjustable fan speeds.
Dehumidification: Up to 50 pints per day.
Noise Level: 52 dB.
Dimensions: 28.5 x 17.5 x 15.5 inches.
Weight: 60 lbs.

Controls and Settings

Access settings via the remote control or the control panel on the unit. Controls include power, mode selection, temperature adjustment, and fan speed settings.

Remote: Power, Mode, Temperature Up/Down, Fan Speed, Timer.

Settings include temperature range, fan speed options, and timer settings for convenience.

Connecting Devices

Ensure the air conditioner is properly connected to a power source and that the window kit is securely installed.

Turn off the unit before making any adjustments.
Ensure all connections are tight and secure.

Tip: Regularly check the exhaust hose for any blockages.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings using the remote control.

Press the power button to turn on the unit.
Select cooling mode and set the temperature.
Adjust fan speed as needed for comfort.

WARNING! Do not block the air intake or exhaust vents during operation.

Accessibility Features

The unit is designed for easy access and operation, with large buttons on the remote and control panel for ease of use.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior and clean the air filter regularly to maintain performance.

CAUTION! Do not use harsh chemicals or abrasive materials.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power outlet and connections.
No cooling	Incorrect settings	Ensure unit is set to cooling mode and temperature is set correctly.
Excessive noise	Blocked air intake	Check for obstructions and clean the air filter.
Water leakage	Full water tank	Empty the water tank and ensure proper drainage.

Reset: Unplug the unit for 10 minutes to reset.

Service: 1-800-263-2629; www.danby.com