Danby DPAC7099 Air Conditioner Manual

The Danby DPAC7099 is a portable air conditioner designed to provide efficient cooling for rooms up to 350 square feet. It features a 7000 BTU cooling capacity, a built-in dehumidifier, and a programmable timer. The unit is equipped with a remote control for easy operation, and it includes a window installation kit for quick setup. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting the Unit 7. Operating the Air Conditioner 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, built-in dehumidifier, programmable timer, adjustable fan speeds.

Feature	Description
7000 BTU Cooling Capacity	Efficient cooling for rooms up to 350 sq. ft.
Built-in Dehumidifier	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off at specific times.
Window Installation Kit	Easy setup for venting hot air outside.
Adjustable Fan Speeds	Customize airflow to your preference.

Installation

Unpack the unit and inspect for any damage. Follow these steps for installation:

Choose a suitable location near a window and power outlet.
Assemble the window installation kit according to the instructions.
Attach the exhaust hose to the back of the unit.
Secure the window kit in place and ensure a tight seal.
Plug the unit into a grounded outlet.

WARNING! Ensure the unit is placed on a flat surface to avoid tipping.

First-Time Setup

Power on the unit and follow the remote control instructions.

Select the desired cooling mode using the remote.
Set the temperature using the up/down buttons.
Adjust the fan speed as needed.
Use the timer function to schedule operation.

CAUTION! Do not block the air intake or exhaust vents.

Specifications

Cooling Capacity: 7000 BTU.
Room Size: Up to 350 sq. ft.
Power Supply: 115V/60Hz.
Air Flow: Adjustable fan speeds.
Dehumidification: 1.2 pints/hour.
Noise Level: 52 dB.
Dimensions: 28.5 x 17.5 x 15.5 inches.
Weight: 60 lbs.

Controls and Settings

Access settings via the remote control or control panel on the unit. Key functions include:

Remote: Power, Mode, Temperature, Fan Speed, Timer.

Adjust settings for optimal comfort and efficiency.

Connecting the Unit

Ensure proper connections for optimal performance:

Connect the exhaust hose securely to the unit.
Ensure the window installation kit is properly sealed.
Plug the unit into a grounded outlet.

Tip: Avoid using extension cords to prevent overheating.

Operating the Air Conditioner

Follow these steps to operate the unit:

Press the power button to turn on the unit.
Select the cooling mode and set the desired temperature.
Adjust the fan speed for comfort.
Use the timer function to schedule operation.

WARNING! Do not block the air intake or exhaust vents during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Clean or replace the air filter every month.
Wipe the exterior with a damp cloth.
Check the exhaust hose for blockages.

CAUTION! Always unplug the unit before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power outlet and ensure unit is plugged in.
Insufficient cooling	Blocked air intake	Ensure air intake and exhaust are clear.
Noisy operation	Loose parts	Check for loose components and tighten if necessary.
Water leakage	Full water tank	Empty the water tank and ensure proper drainage.

Service: For further assistance, contact Danby customer service.