Danby DPAC5070 Air Conditioner Manual

The Danby DPAC5070 is a portable air conditioner designed to provide efficient cooling for rooms up to 250 square feet. It features a 5000 BTU cooling capacity, a dehumidifier function, and a programmable timer. The unit is equipped with a remote control, adjustable fan speeds, and a washable air filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable fan speeds, dehumidifier function, washable air filter.

FeatureDescription
Cooling Capacity5000 BTU, suitable for rooms up to 250 sq. ft.
DehumidifierRemoves excess moisture from the air.
Remote ControlConvenient operation from a distance.
Programmable TimerSet the unit to turn on/off at specific times.
Washable FilterEasy to clean for optimal performance.
Adjustable Fan SpeedsCustomize airflow to your preference.

Installation

Unpack the air conditioner and inspect for any damage. Place the unit near a window for easy venting.

  1. Install the window kit: Follow the instructions to secure the kit in the window.
  2. Connect the exhaust hose: Attach one end to the unit and the other to the window kit.
  3. Plug into a grounded outlet: Ensure the power supply matches the unit's requirements.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the unit and follow the on-screen prompts to set your preferences.

  1. Select cooling mode: Use the remote or control panel to choose the desired mode.
  2. Set the temperature: Adjust to your comfort level using the temperature controls.
  3. Program the timer: Set the unit to turn on or off at specific times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Controls and Settings

Access settings via the control panel or remote. Features include cooling mode selection, temperature adjustment, and fan speed control.

Remote: Power, mode selection, temperature controls, timer settings.

Maintenance: Regularly check and clean the air filter for optimal performance.

Connecting to Power

Ensure the unit is plugged into a grounded outlet. Do not use extension cords.

  1. Check the power supply: Ensure it matches the unit's requirements.
  2. Plug the unit into the outlet: Ensure a secure connection.

Tip: Avoid overloading circuits.

Operating the Air Conditioner

To operate, select the desired cooling mode and adjust the temperature settings.

  1. Turn on the unit: Press the power button on the remote or control panel.
  2. Select cooling mode: Choose from cool, fan, or dehumidify.
  3. Adjust temperature: Use the up/down buttons to set your desired temperature.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter monthly and check for any blockages.

CAUTION! Unplug the unit before performing any maintenance.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For more information, visit the manufacturer's website.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit does not turn onNo powerCheck power supply and connections.
No coolingIncorrect settingsEnsure unit is set to cooling mode.
Water leakageFull tankEmpty the water tank.
Unusual noiseBlocked fanCheck for obstructions in the fan.

Reset: Unplug the unit for 10 seconds to reset.

Service: Contact customer support for further assistance.

Danby DPAC5070 Air Conditioner Manual © - All Rights Reserved 2026