Danby DPAC120068 Air Conditioner Manual

The Danby DPAC120068 is a portable air conditioner designed to provide efficient cooling for spaces up to 550 square feet. It features a sleek design, easy-to-use controls, and a variety of modes including cooling, dehumidifying, and fan. This unit is equipped with a remote control, programmable timer, and energy-saving features to enhance comfort and convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, programmable timer, adjustable thermostat, multiple fan speeds.

Feature	Description
Cooling Capacity	12,000 BTU, suitable for rooms up to 550 sq. ft.
Dehumidifier Function	Removes up to 1.5 pints of moisture per hour.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on or off at specific times.
Energy Efficiency	Energy Star certified for lower energy consumption.
Adjustable Thermostat	Customize your comfort level easily.
Multiple Fan Speeds	Choose between low, medium, and high settings.
Easy Installation	Includes window kit for quick setup.

Installation

Unpack and inspect contents. Choose a suitable location for the air conditioner.

Install the window kit: Follow the instructions to secure the unit in the window.
Connect the exhaust hose: Ensure it is properly attached to the unit and window kit.
Plug into AC power: Use a grounded outlet for safety.

WARNING! Ensure the unit is stable and secure to avoid accidents.

First-Time Setup

Power on the unit; follow the remote control prompts.

Select cooling mode: Use the mode button to choose between cooling, fan, or dehumidifying.
Set desired temperature: Adjust using the up/down buttons on the remote.
Program timer: Set the unit to turn on or off at your preferred times.

CAUTION! Ensure the air intake and exhaust are not obstructed.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 550 sq. ft.
Energy Efficiency Ratio: 12.1 EER.
Power Supply: 115V/60Hz.
Air Flow: 350 CFM.
Noise Level: 52 dBA.
Weight: 70 lbs.
Dimensions: 30 x 18 x 15 inches.

Controls and Settings

Access controls via the remote or the unit's control panel. Features include power, mode selection, temperature adjustment, and fan speed settings.

Remote: Power, mode, temperature up/down, fan speed, timer.

Connecting Devices

Ensure the air conditioner is properly connected to a power source and the window kit is securely installed.

Turn off the unit before making any adjustments.
Ensure all connections are tight and secure.

Tip: Regularly check the exhaust hose for any blockages.

Operating the Air Conditioner

To operate, simply power on and select your desired mode and temperature.

Press the power button to turn on the unit.
Select cooling mode and set the temperature.
Adjust fan speed as needed.
Monitor the room temperature for optimal comfort.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter monthly and ensure the unit is free from dust and debris.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect mode	Ensure unit is set to cooling mode.
Excessive noise	Obstructions	Check for blockages around the unit.
Water leakage	Full water tank	Empty the water tank as needed.

Reset: Unplug the unit for 10 seconds to reset.

Service: 1-800-263-2629; www.danby.com