Danby DPAC11010 Air Conditioner Manual

The Danby DPAC11010 is a portable air conditioner designed to cool spaces up to 450 square feet. It features a 10,000 BTU cooling capacity, a built-in dehumidifier, and a programmable thermostat. The unit includes a remote control, multiple fan speeds, and a 24-hour timer for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Unit 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Cooling Capacity	10,000 BTU for effective cooling
Dehumidifier	Removes excess moisture from the air
Remote Control	Convenient operation from a distance
24-Hour Timer	Programmable for automatic operation
Fan Speeds	Multiple settings for customized airflow
Portability	Wheels for easy movement between rooms

Installation

Unpack and inspect contents. Place the unit near a window for venting.

Install the window kit: Follow instructions to fit the kit into the window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the unit and set the desired temperature.

Select cooling mode: Use the mode button to choose between cooling and dehumidifying.
Set temperature: Adjust the thermostat to your comfort level.
Adjust fan speed: Choose from low, medium, or high settings.

CAUTION! Ensure proper ventilation for optimal performance.

Specifications

Cooling Capacity: 10,000 BTU.
Coverage Area: Up to 450 sq. ft.
Power Consumption: 1150 watts.
Dehumidification: 1.2 pints/hour.
Noise Level: 52 dBA.
Dimensions: 29.5 x 17.5 x 15.5 inches.
Weight: 70 lbs.

Controls and Settings

Access settings via the control panel or remote. Controls include power, mode, temperature, and fan speed.

Remote: Power, mode selection, temperature adjustment, fan speed control.

Connecting to Power

Ensure the unit is plugged into a grounded outlet. Avoid using extension cords.

Check power supply: Ensure the outlet is functional.
Plug in the unit: Insert the plug firmly into the outlet.
Turn on the unit: Use the power button on the control panel or remote.

Operating the Unit

Follow the instructions to operate the air conditioner effectively.

Adjust settings: Use the control panel or remote to set your preferences.
Monitor performance: Check the temperature and adjust as necessary.
Turn off when not in use: Use the power button to save energy.

Maintenance and Care

Regular maintenance ensures optimal performance. Clean the filter monthly.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
Insufficient cooling	Dirty filter	Clean or replace the air filter.
Water leakage	Improper installation	Check window kit and hose connections.
Noise during operation	Loose parts	Tighten any loose components.

Reset: Unplug the unit for 10 minutes to reset.

Service: For assistance, contact Danby customer service.