Danby DPA140HEAUWDB Air Conditioner Manual

The Danby DPA140HEAUWDB is a 14,000 BTU portable air conditioner designed to cool spaces up to 700 square feet. It features a dehumidifier function, a programmable timer, and a remote control for convenience. This unit is equipped with a 3-speed fan and an adjustable thermostat, ensuring optimal comfort in various conditions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 14,000 BTU cooling capacity, dehumidifier function, remote control, programmable timer, adjustable thermostat.

Feature	Description
Cooling Capacity	14,000 BTU, suitable for rooms up to 700 sq. ft.
Dehumidifier Function	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off at desired times.
3-Speed Fan	Adjustable fan speeds for customized airflow.
Adjustable Thermostat	Set your preferred temperature for comfort.

Installation

Unpack and inspect contents. Place the air conditioner on a stable surface near a window.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow the remote control instructions.

Set the desired cooling mode: Use the remote to select cooling or dehumidifying mode.
Adjust the temperature: Set your preferred temperature using the thermostat.
Program the timer: Use the timer function to schedule operation times.

CAUTION! Ensure the unit is properly installed before operation.

Specifications

Cooling Capacity: 14,000 BTU.
Coverage Area: Up to 700 sq. ft.
Power Supply: 115V/60Hz.
Dehumidification: Up to 86 pints per day.
Fan Speeds: 3 speeds.
Noise Level: 52 dB (low speed).
Dimensions: 17.5" W x 30.5" H x 15.5" D.

Controls and Settings

Access settings via the remote control or the unit's control panel. Key controls include power, mode selection, temperature adjustment, and fan speed.

Connecting Devices

Ensure the air conditioner is properly connected to the power outlet. No additional devices are required for operation.

Operating the Air Conditioner

To operate, use the remote control or the control panel to select your desired settings.

Turn on the unit: Press the power button.
Select cooling mode: Choose between cooling and dehumidifying.
Adjust temperature and fan speed as needed.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter monthly and ensure the exhaust hose is free of obstructions.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No cooling	Incorrect settings	Check mode and temperature settings.
Unit not turning on	Power supply issue	Check power outlet and connections.
Excessive noise	Obstruction or malfunction	Ensure vents are clear; contact support if needed.
Water leakage	Full water tank	Empty the water tank and check for proper installation.

Reset: Unplug the unit for 5 minutes to reset.

Service: 1-877-326-2499; www.danby.com