Danby DPA140HEAUBDB Air Conditioner Manual

The Danby DPA140HEAUBDB is a 14,000 BTU portable air conditioner designed to provide efficient cooling for medium to large rooms. It features a sleek design, easy-to-use controls, and multiple cooling modes, including dehumidification and fan-only options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and programmable timer.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Set your desired temperature easily
Multiple Fan Speeds	Customize airflow to your preference
Programmable Timer	Set the unit to turn on/off at specific times

Installation

Unpack and inspect contents. Place the unit on a flat, stable surface.

Install the window kit: Follow the instructions to secure the window kit in place.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow the on-screen prompts.

Set the mode: Choose between cooling, fan, or dehumidification modes.
Adjust the temperature: Use the remote or control panel to set your desired temperature.
Set the timer: Program the unit to operate at specific times if desired.

CAUTION! Ensure the unit is properly installed before operating.

Specifications

Cooling Capacity: 14,000 BTU.
Energy Efficiency Ratio (EER): 12.0.
Air Flow: Adjustable fan speeds with up to 400 CFM.
Noise Level: Operates at 52 dBA.
Power Supply: 115V/60Hz.
Weight: 70 lbs.
Dimensions: 17.5 x 15 x 30 inches.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, mode selection, and fan speed control.

Remote: POWER, MODE, TEMP UP/DOWN, FAN SPEED, TIMER.

Connecting Devices

No external devices are required for operation; however, ensure the unit is connected to a suitable power outlet.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings using the control panel or remote.

Accessibility Features

The unit features easy-to-read controls and a remote for convenient operation.

Care & Cleaning

Unplug the unit before cleaning. Use a damp cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Ensure the unit is dry before plugging it back in.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Improper installation	Check window kit and exhaust hose connections.
Remote not working	Batteries	Replace batteries in the remote.
Water leaking	Full water tank	Empty the water tank and ensure proper drainage.
Unit making noise	Loose parts	Check for loose components and secure them.

Reset: Unplug the unit for 10 seconds to reset.

Service: 1-800-263-2629; www.danby.com