Danby DPA140HBCBDB Air Conditioner Manual

The Danby DPA140HBCBDB is a 14,000 BTU portable air conditioner designed for cooling spaces up to 700 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including dehumidification and fan-only options. This unit is equipped with a programmable thermostat, remote control, and a 24-hour timer for added convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 14,000 BTU cooling capacity, programmable thermostat, remote control, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Cooling Capacity	14,000 BTU, suitable for rooms up to 700 sq. ft.
Dehumidification	Removes excess moisture from the air.
Remote Control	Convenient control from a distance.
24-Hour Timer	Programmable on/off settings.
Multiple Fan Speeds	Customize airflow to your preference.
Easy Installation	Includes window kit for quick setup.
Energy Efficient	Designed to save on energy costs.

Installation

Unpack the air conditioner and inspect for any damage. Follow the steps below for proper installation.

Choose a suitable location near a window and a power outlet.
Install the window kit according to the included instructions.
Connect the exhaust hose to the unit and the window kit.
Plug the unit into a grounded outlet.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select your desired cooling mode using the remote or control panel.
Set the temperature using the thermostat controls.
Adjust fan speed as needed for optimal comfort.
Utilize the timer feature to schedule operation times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 14,000 BTU.
Room Size: Up to 700 sq. ft.
Power Supply: 115V, 60Hz.
Energy Efficiency Ratio (EER): 10.8.
Dehumidification: Up to 80 pints per day.
Noise Level: 52 dB.
Weight: 75 lbs.
Dimensions: 34.5" H x 18.5" W x 15.5" D.

Controls and Settings

Access settings via the control panel or remote. Key controls include power, mode selection, temperature adjustment, and fan speed.

Remote: Power, Mode, Temperature Up/Down, Fan Speed, Timer.

Settings: Adjust temperature, select cooling mode (cool, fan, dehumidify), and set timer for operation.

Connecting Devices

This unit does not require additional devices for operation. Ensure proper power supply connection.

Check that the power outlet is functional.
Use the provided window kit for exhaust connection.
Ensure the unit is securely plugged into the outlet.

Tip: Avoid using extension cords to prevent overheating.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings.

Press the power button to turn on the unit.
Select the cooling mode and set the desired temperature.
Adjust the fan speed as needed.
Utilize the timer feature for scheduled operation.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Follow these guidelines:

Clean or replace the air filter every month.
Wipe down the exterior with a damp cloth.
Check the exhaust hose for blockages.
Store the unit in a cool, dry place during off-seasons.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power outlet and plug connection.
No cooling	Incorrect settings	Ensure cooling mode is selected and temperature is set lower than room temperature.
Excessive noise	Improper installation	Check for secure placement and ensure no objects are obstructing the unit.
Water leakage	Full water tank	Empty the water tank and ensure proper drainage.

Reset: Unplug the unit for 5 minutes to reset.

Service: For assistance, contact Danby customer service.