Danby DPA140B8BDB-6 Air Conditioner Manual

The Danby DPA140B8BDB-6 is a 14,000 BTU portable air conditioner designed to cool spaces up to 700 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes including fan and dehumidifier functions. The unit is equipped with a remote control, programmable timer, and energy-saving features to ensure optimal comfort and efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, programmable timer, multiple cooling modes, and energy-efficient operation.

Feature	Description
Cooling Capacity	14,000 BTU, suitable for rooms up to 700 sq. ft.
Modes	Cool, Fan, Dehumidify
Remote Control	Convenient operation from a distance
Programmable Timer	Set the unit to turn on/off automatically
Energy Efficiency	Designed to save energy and reduce costs

Installation

Unpack and inspect contents. Place the unit on a flat, stable surface near a window.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into a power outlet: Ensure the outlet is grounded and meets the unit's requirements.

WARNING! Ensure the unit is stable to avoid tipping. Check all connections before use.

First-Time Setup

Power on the unit; follow the remote control instructions.

Select cooling mode: Use the mode button on the remote.
Set desired temperature: Adjust using the temperature controls.
Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is properly installed before operating.

Specifications

Cooling Capacity: 14,000 BTU.
Room Size: Up to 700 sq. ft.
Power Supply: 115V/60Hz.
Air Flow: 450 CFM.
Noise Level: 52 dB.
Weight: 70 lbs.
Dimensions: 17.5" x 15" x 30".

Controls and Settings

Access settings via the remote control or the unit's control panel. Features include temperature adjustment, mode selection, and fan speed settings.

Remote: Power, Mode, Temperature Up/Down, Fan Speed, Timer.

Connecting Devices

Ensure the unit is connected to a power source and properly installed in the window.

Turn off the unit before making any adjustments.
Ensure all connections are secure and properly fitted.

Tip: Regularly check the exhaust hose for any obstructions.

Operating the Air Conditioner

To operate, use the remote control or the unit's control panel.

Turn on the unit: Press the power button.
Select cooling mode: Choose from Cool, Fan, or Dehumidify.
Adjust temperature: Set your desired temperature using the controls.

WARNING! Do not block the air intake or exhaust.

Accessibility Features

The unit is designed for ease of use, featuring large buttons and a remote control for convenience.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior; do not use abrasive cleaners.

CAUTION! Ensure the unit is dry before plugging it back in.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power outlet and connections.
No cooling	Incorrect mode	Ensure unit is set to Cool mode.
Excessive noise	Loose parts	Check for loose components or debris.
Water leakage	Full tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 10 seconds to reset.

Service: 1-800-263-2629; www.danby.com