Danby DPA120B9IWDB-6 Air Conditioner Manual

The Danby DPA120B9IWDB-6 is a 12,000 BTU portable air conditioner designed for efficient cooling in residential spaces. It features a sleek design, easy-to-use controls, and multiple cooling modes to ensure comfort during hot weather. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and programmable timer.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Customizable temperature settings
Multiple Fan Speeds	Choose from low, medium, or high
Programmable Timer	Set the unit to turn on/off at specific times

Installation

Unpack and inspect contents. Place the air conditioner on a flat, stable surface.

Install the exhaust hose: Attach the hose to the back of the unit and the window kit.
Connect the power supply: Plug the unit into a grounded outlet.
Adjust the window kit: Ensure it fits securely in your window.

WARNING! Ensure the unit is stable to avoid tipping over.

First-Time Setup

Power on the unit; follow the on-screen prompts.

Select cooling mode: Use the mode button to choose between cool, fan, and dehumidify.
Set desired temperature: Adjust the thermostat to your preference.
Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is not obstructed for optimal airflow.

Specifications

Cooling Capacity: 12,000 BTU.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio: 12.0 EER.
Air Flow: 350 CFM.
Noise Level: 52 dBA.
Weight: 70 lbs.
Dimensions: 30" H x 18" W x 15" D.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: Power, mode, temperature up/down, fan speed, timer.

Connecting Devices

Ensure the air conditioner is connected to a power source. No additional devices are required for operation.

Operating the Air Conditioner

To operate, select the desired mode and temperature. Monitor the temperature and adjust as needed.

Maintenance and Care

Regularly clean the air filter and ensure the exhaust hose is free of obstructions.

CAUTION! Unplug the unit before performing maintenance.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect settings	Ensure unit is set to cool mode.
Excessive noise	Obstruction or loose parts	Check for blockages and tighten screws.
Water leakage	Full water tank	Empty the water tank and check for proper drainage.

Reset: Unplug the unit for 5 minutes to reset.

Service: 1-800-263-2629; www.danby.com