Danby DPA120B9IBDB-RF Air Conditioner Manual

The Danby DPA120B9IBDB-RF is a 12,000 BTU portable air conditioner designed to cool spaces up to 550 square feet. It features a sleek design, easy-to-use controls, and a variety of modes including cooling, dehumidifying, and fan. The unit is equipped with a remote control, programmable timer, and energy-saving features to ensure optimal comfort and efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, Remote Control, Programmable timer, Adjustable thermostat, Multiple fan speeds.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Programmable Timer	Set the unit to turn on/off at specific times
Adjustable Thermostat	Customize your cooling preferences
Multiple Fan Speeds	Choose the desired airflow level
Energy Saving Mode	Reduces energy consumption while maintaining comfort

Installation

Unpack and inspect contents. Place the air conditioner on a flat surface near a window.

Install the window kit: Follow the instructions to secure the window panel.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the unit; follow the on-screen prompts.

Select cooling mode: Use the mode button to choose between cooling, dehumidifying, and fan.
Set temperature: Adjust the thermostat to your desired level.
Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Coverage Area: Up to 550 sq. ft.
Power Supply: 115V/60Hz.
Noise Level: 52 dB.
Dimensions: 30" H x 18" W x 15" D.
Weight: 70 lbs.
Energy Efficiency Ratio (EER): 12.1.

Controls and Settings

Access controls via the front panel or remote. Features include power, mode selection, temperature adjustment, and fan speed settings.

Remote: Power, Mode, Temperature, Fan Speed, Timer.

Connecting Devices

No additional devices are required for operation. Ensure the unit is plugged into a suitable outlet.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired mode and settings.

Press the power button to turn on.
Select the cooling mode and adjust the temperature.
Use the fan speed settings to control airflow.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The air conditioner is designed for ease of use, with large buttons and a clear display for visibility.

Care & Cleaning

Unplug the unit before cleaning. Use a soft, damp cloth to clean the exterior; do not use harsh chemicals.

CAUTION! Ensure the unit is completely dry before plugging it back in.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Settings or airflow blockage	Ensure settings are correct; check for obstructions.
Excessive noise	Improper installation	Ensure unit is level and secure.
Water leakage	Full water tank	Empty the water tank as per instructions.

Reset: Unplug the unit for 10 minutes to reset.

Service: For assistance, contact Danby customer service.