Danby DPA120B6WDB-6 Air Conditioner Manual

The Danby DPA120B6WDB-6 is a 12,000 BTU portable air conditioner designed to provide efficient cooling for rooms up to 550 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidifier settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Customize your comfort level
Multiple Fan Speeds	Choose the cooling intensity
Built-in Dehumidifier	Reduces humidity for added comfort

Installation

Unpack and inspect contents. Place the air conditioner on a stable surface.

Install the window kit: Follow the instructions to secure the kit in your window.
Connect the exhaust hose: Attach the hose to the air conditioner and window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure all connections are secure to avoid leaks.

First-Time Setup

Power on the air conditioner; follow the on-screen prompts.

Select cooling mode: Use the remote or control panel to choose the desired mode.
Set temperature: Adjust the thermostat to your preferred setting.
Adjust fan speed: Select the fan speed for optimal comfort.

CAUTION! Ensure the unit is on a flat surface for proper operation.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 550 square feet.
Energy Efficiency Ratio (EER): 12.1.
Power Supply: 115V/60Hz.
Weight: 70 lbs.
Dimensions: 30" H x 18" W x 15" D.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: POWER, MODE, FAN, TEMP UP/DOWN.

Connecting Devices

Ensure the air conditioner is properly connected to the power outlet and window kit.

Turn off the unit before making any connections.
Follow the installation instructions for connecting the exhaust hose.

Tip: Ensure the window kit is securely installed to prevent air leaks.

Operating the Air Conditioner

To operate, press the POWER button and select your desired mode and temperature.

Press POWER to turn on the unit.
Select cooling mode using the MODE button.
Adjust the temperature and fan speed as needed.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The air conditioner is designed for ease of use, with large buttons and a clear display for visibility.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Ensure the unit is dry before plugging it back in.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power outlet and connections.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode.
Water leaking	Clogged drain	Check and clear the drain line.
Noise during operation	Improper installation	Ensure the unit is level and secure.

Reset: Unplug the unit for 10 seconds to reset.

Service: For assistance, contact Danby customer service.