Danby DPA120B3WDB Air Conditioner Manual

The Danby DPA120B3WDB is a 12,000 BTU portable air conditioner designed for efficient cooling in medium to large rooms. It features a sleek design, easy-to-use controls, and multiple cooling modes including cooling, fan, and dehumidifying. The unit is equipped with a programmable timer, remote control, and a washable air filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Portable design, Remote Control, Programmable timer, Washable air filter, Multiple cooling modes.

Installation

Unpack and inspect contents. Place the unit on a flat surface near a window.

1. Install the window kit: Follow the instructions to secure the kit in the window.
2. Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
3. Plug into AC power: Ensure the outlet is grounded and suitable for the unit.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow on-screen prompts or remote instructions.

1. Select cooling mode: Use the mode button to choose between cooling, fan, or dehumidifying.
2. Set desired temperature: Use the temperature controls to adjust to your comfort level.
3. Program timer: Set the timer for automatic operation as needed.

CAUTION! Ensure the unit is properly installed before use.

Specifications

• Cooling Capacity: 12,000 BTU.
• Room Size: Up to 550 sq. ft.
• Power Consumption: 1150W.
• Noise Level: 52 dB.
• Refrigerant: R410A.
• Dimensions: 30.5 x 18.5 x 15.5 inches.
• Weight: 70 lbs.
• Warranty: 1 year parts and labor.

Controls and Settings

Access settings via the control panel or remote. Key controls include power, mode selection, temperature adjustment, and fan speed.

Remote: Power, Mode, Temperature, Timer, Fan Speed.

Settings: Adjust temperature, set timer, and choose cooling modes easily.

Connecting Devices

No additional devices are required for operation. Ensure the unit is plugged into a suitable power outlet.

1. Ensure the unit is off before connecting to power.
2. Use the provided window kit for proper installation.

Tip: Keep the area around the unit clear for optimal airflow.

Operating the Air Conditioner

To operate, simply power on and select your desired mode and temperature.

1. Press the power button to turn on the unit.
2. Select the cooling mode using the mode button.
3. Adjust the temperature to your preference.
4. Use the timer function if needed for automatic operation.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The unit is designed for easy access and operation for all users, including those with disabilities.

Care & Cleaning

Unplug the unit before cleaning. Use a soft, dry cloth to clean the exterior.

CAUTION! Do not use liquids or aerosols; keep away from heat sources.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Reset: Unplug the unit for 5 minutes to reset.

Service: For service inquiries, contact Danby customer support.