Danby DPA120B1WB Air Conditioner Manual

The Danby DPA120B1WB is a 12,000 BTU portable air conditioner designed for cooling spaces up to 550 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes including fan and dehumidifier functions. This unit is equipped with a remote control, programmable timer, and adjustable thermostat for optimal comfort. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple cooling modes, and a built-in dehumidifier.

Feature	Description
Cooling Capacity	12,000 BTU for spaces up to 550 sq. ft.
Modes	Cool, Fan, Dehumidify
Remote Control	Convenient operation from a distance
Programmable Timer	Set the unit to turn on/off automatically
Adjustable Thermostat	Customize your comfort level
Easy Installation	Includes window kit for quick setup

Installation

Unpack and inspect contents. Choose a suitable location for the air conditioner.

Install the window kit: Follow the instructions to secure the kit in your window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow the remote control prompts.

Select cooling mode: Use the mode button on the remote.
Set desired temperature: Adjust using the thermostat control.
Program timer: Set the unit to turn on/off at specific times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Coverage Area: Up to 550 sq. ft.
Power Supply: 115V/60Hz.
Air Flow: Adjustable fan speeds.
Dehumidification: Up to 1.5 pints/hour.
Noise Level: 52 dB (low setting).
Dimensions: 30.5 x 17.5 x 14.5 inches.

Controls and Settings

Access settings via the remote control or the control panel on the unit.

Remote: Power, Mode, Temperature, Fan Speed, Timer.

Settings: Adjust cooling modes, set temperature, and program the timer for convenience.

Connecting Devices

Ensure the air conditioner is properly connected to a power source.

Turn off the unit before connecting any additional devices.
Use the appropriate power outlet for the air conditioner.

Tip: Avoid using extension cords to prevent overheating.

Operating the Air Conditioner

To operate, use the remote control or the control panel.

Press the power button to turn on the unit.
Select the desired cooling mode.
Adjust the temperature and fan speed as needed.
Use the timer function for scheduled operation.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean or replace the air filter every month to ensure efficient operation.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode.
Water leakage	Full water tank	Empty the water tank and check for blockages.
Excessive noise	Improper installation	Ensure the unit is level and securely installed.

Reset: Unplug the unit for 10 seconds to reset.

Service: 1-877-326-2499; www.danby.com