Danby DPA120A1GB Air Conditioner Manual

The Danby DPA120A1GB is a 12,000 BTU portable air conditioner designed to cool spaces up to 550 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including dehumidification and fan-only options. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and programmable timer.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Set your desired temperature easily
Multiple Fan Speeds	Customize airflow to your preference
Programmable Timer	Set the unit to turn on/off at specific times

Installation

Unpack and inspect contents. Place the air conditioner on a flat, stable surface near a window.

Install the window kit: Follow the instructions to fit the window kit securely.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the unit is connected to a suitable power outlet.

WARNING! Ensure proper ventilation and avoid blocking airflow.

First-Time Setup

Power on the unit; follow the remote control instructions.

Select cooling mode: Use the mode button to choose between cooling, dehumidification, and fan.
Set temperature: Adjust the thermostat to your desired level.
Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is level for optimal performance.

Specifications

Cooling Capacity: 12,000 BTU.
Coverage Area: Up to 550 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.1.
Noise Level: 52 dB.
Weight: 70 lbs.
Dimensions: 30" H x 18" W x 15" D.

Controls and Settings

Access settings via the remote control or control panel. Features include temperature adjustment, fan speed selection, and mode selection.

Remote: POWER, MODE, FAN, TEMP UP/DOWN, TIMER.

Connecting Devices

Ensure the air conditioner is properly connected to a power source and the window kit is installed correctly.

Turn off the unit before making any connections.
Ensure all connections are secure and leak-free.

Tip: Use a surge protector for added safety.

Operating the Air Conditioner

Follow the instructions for optimal cooling performance.

Turn on the unit: Press the POWER button.
Select cooling mode: Choose your desired mode using the remote.
Adjust settings: Use the thermostat and fan speed controls as needed.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter monthly and ensure the unit is free from dust and debris.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect settings	Ensure unit is set to cooling mode.
Excessive noise	Obstruction	Check for any objects blocking the unit.
Water leakage	Full water tank	Empty the water tank as needed.

Reset: Unplug the unit for 5 minutes to reset.

Service: 1-800-263-2629; www.danby.com