Danby DPA100HE5WDB-6 Air Conditioner Manual

The Danby DPA100HE5WDB-6 is a 10,000 BTU portable air conditioner designed for cooling spaces up to 450 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes including fan and dehumidifier functions. This unit is equipped with a remote control, programmable timer, and energy-saving features to ensure optimal comfort and efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Portable Design	Easy to move and set up in any room.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on or off at specific times.
Multiple Cooling Modes	Choose between cooling, fan, and dehumidifying modes.
Energy Saving	Designed to reduce energy consumption while maintaining comfort.

Installation

Unpack and inspect contents. Place the air conditioner on a stable surface near a window.

Install the window kit: Follow the instructions to secure the window panel.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow the on-screen prompts.

Select cooling mode: Use the mode button to choose between cooling, fan, or dehumidifying.
Set desired temperature: Adjust the thermostat to your comfort level.
Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 10,000 BTU.
Coverage Area: Up to 450 square feet.
Power Supply: 115V, 60Hz.
Noise Level: 52 dB (low speed).
Dimensions: 30" H x 18" W x 15" D.
Weight: 70 lbs.
Energy Efficiency Ratio (EER): 12.0.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, fan speed selection, and mode changes.

Remote: Power, mode, temperature up/down, fan speed, timer.

Connecting Devices

Ensure the air conditioner is properly connected to a power source and the exhaust hose is attached to the window kit.

Turn off the unit before making any adjustments.
Ensure all connections are secure.

Tip: Keep the area around the air conditioner clear for optimal airflow.

Operating the Air Conditioner

To operate, press the power button, select the desired mode, and adjust the temperature.

Press POWER to turn on the unit.
Select the cooling mode using the mode button.
Adjust the temperature using the up/down buttons.
Set the fan speed as desired.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The unit includes a remote control for easy access and operation from a distance.

Care & Cleaning

Unplug the unit before cleaning. Use a damp cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Ensure the unit is dry before plugging it back in.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power source and connections.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode.
Excessive noise	Improper installation	Check for loose parts or obstructions.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 5 minutes to reset.

Service: For assistance, contact Danby customer service.