Danby DPA100B2WDB Air Conditioner Manual

The Danby DPA100B2WDB is a 10,000 BTU portable air conditioner designed for cooling spaces up to 450 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes. This unit includes a remote control, a programmable timer, and a dehumidifier function, making it ideal for maintaining comfort during hot weather. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, programmable timer, dehumidifier function, multiple cooling modes.

Feature	Description
Cooling Capacity	10,000 BTU, suitable for rooms up to 450 sq. ft.
Remote Control	Convenient control from a distance.
Programmable Timer	Set the unit to turn on/off automatically.
Dehumidifier Function	Removes excess moisture from the air.
Multiple Modes	Cool, fan, and dehumidify modes available.

Installation

Unpack and inspect contents. Place the unit on a stable surface near a window.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow on-screen prompts.

Select cooling mode: Use the mode button to choose between cooling, fan, and dehumidify.
Set temperature: Use the up/down buttons to adjust the desired temperature.
Program timer: Set the timer for automatic on/off functionality.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 450 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio: 12.0 EER.
Noise Level: 52 dB (low setting).
Weight: 70 lbs.
Dimensions: 30" H x 18" W x 15" D.

Controls and Settings

Access controls via the front panel or remote. Settings include temperature adjustment, mode selection, and fan speed.

Remote: Power, mode, temperature, timer, fan speed.

Connecting Devices

Ensure the air conditioner is properly connected to a power source and the window kit is installed correctly.

Turn off the unit before making any adjustments.
Ensure all connections are secure.

Tip: Regularly check the exhaust hose for any blockages.

Operating the Air Conditioner

To operate, select the desired mode and temperature using the remote or control panel.

Press the power button to turn on the unit.
Select the cooling mode and set the temperature.
Adjust fan speed as needed.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

Remote control allows for easy access to settings without needing to reach the unit.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Ensure the unit is dry before plugging it back in.

Regulatory Information

This unit complies with all applicable safety standards. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect settings	Ensure unit is set to cooling mode and temperature is set correctly.
Water leaks	Full water tank	Empty the water tank and ensure proper drainage.
Excess noise	Loose parts	Check for loose components and tighten as necessary.

Reset: Unplug the unit for 10 seconds to reset.

Service: For assistance, contact customer service at 1-800-263-2629.