Danby DPA080E2WDB-6 Air Conditioner Manual

The Danby DPA080E2WDB-6 is a portable air conditioner designed to provide efficient cooling for rooms up to 350 square feet. It features a 3-in-1 functionality, including cooling, dehumidifying, and fan modes. The unit is equipped with a remote control, programmable timer, and adjustable thermostat for user convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, programmable timer, and multiple fan speeds.

Feature	Description
Cooling Capacity	8,000 BTU, suitable for rooms up to 350 sq. ft.
Dehumidifying Function	Removes up to 1.5 pints of moisture per hour.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off automatically.
Multiple Fan Speeds	Choose from low, medium, or high settings.
Energy Efficiency	Energy Star certified for lower energy consumption.

Installation

Unpack and inspect contents. Ensure the unit is placed on a flat, stable surface.

Install the window kit: Follow the instructions to fit the kit into your window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into an AC outlet: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure proper ventilation and avoid blocking air intake/outlet.

First-Time Setup

Power on the unit and follow the remote control instructions.

Select cooling mode: Use the mode button on the remote.
Set desired temperature: Adjust using the up/down buttons.
Choose fan speed: Select from low, medium, or high.

CAUTION! Ensure the unit is not obstructed for optimal performance.

Specifications

Cooling Capacity: 8,000 BTU.
Room Size: Up to 350 sq. ft.
Power Supply: 115V, 60Hz.
Energy Efficiency Ratio (EER): 12.0.
Dehumidification: 1.5 pints/hour.
Noise Level: 52 dB (low setting).
Dimensions: 28.5 x 17.5 x 14.5 inches.
Weight: 60 lbs.

Controls and Settings

Access settings via the remote control or the control panel on the unit.

Remote: Power, mode, temperature, fan speed, timer.

Settings include temperature adjustment, fan speed selection, and mode switching.

Connecting Devices

Ensure the air conditioner is properly connected to the power supply and window kit.

Turn off the unit before making any connections.
Follow the installation instructions for the window kit and exhaust hose.

Tip: Ensure all connections are secure to prevent air leaks.

Operating the Air Conditioner

To operate, use the remote control or the control panel.

Press the power button to turn on the unit.
Select the desired mode (cooling, fan, or dehumidifying).
Adjust the temperature and fan speed as needed.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean or replace the air filter every month.
Wipe the exterior with a damp cloth.
Check the exhaust hose for blockages.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This product complies with all applicable regulations and standards for safety and efficiency.

For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect settings	Ensure cooling mode is selected and temperature is set correctly.
Water leaks	Clogged drain	Check and clear the drain line.
Excessive noise	Loose parts	Inspect for loose components and tighten as necessary.

Service: For further assistance, contact Danby customer support.