Danby DAS180DBAHWDB Air Conditioner Manual

The Danby DAS180DBAHWDB is an 18,000 BTU portable air conditioner designed for cooling spaces up to 1,000 square feet. It features a dehumidifier function, a programmable thermostat, and a remote control for convenient operation. This unit is equipped with a 24-hour timer, multiple fan speeds, and a washable air filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, Remote Control, Programmable thermostat, Dehumidifier function, Washable air filter.

FeatureDescription
Cooling Capacity18,000 BTU for spaces up to 1,000 sq. ft.
Dehumidifier FunctionRemoves excess moisture from the air.
Remote ControlConvenient operation from a distance.
24-Hour TimerSet the unit to turn on/off automatically.
Multiple Fan SpeedsAdjustable fan speeds for customized comfort.
Washable Air FilterEasy to clean and maintain.

Installation

Unpack and inspect contents. Place the air conditioner on a stable surface near a window.

  1. Install the window kit: Follow the instructions to fit the kit into the window frame.
  2. Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
  3. Plug into AC power: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure all connections are secure to avoid leaks or damage.

First-Time Setup

Power on the air conditioner; follow the on-screen prompts.

  1. Set the desired temperature using the remote control.
  2. Select the cooling mode: Choose between cool, fan, or dehumidify.
  3. Adjust fan speed: Use the remote to set low, medium, or high.

CAUTION! Ensure the unit is placed on a flat surface for optimal operation.

Specifications

Controls and Settings

Access controls via the remote or the unit's control panel. Features include temperature adjustment, mode selection, and fan speed settings.

Remote: POWER, MODE, TEMP UP/DOWN, FAN SPEED, TIMER.

Connecting Devices

Ensure the air conditioner is properly installed before connecting any additional devices.

  1. Turn off the unit before making any connections.
  2. Use compatible extension cords if necessary, ensuring they meet power requirements.

Tip: Avoid using multiple devices on the same outlet to prevent overload.

Operating the Air Conditioner

To operate, use the remote control or the unit's control panel.

  1. Press POWER to turn on the unit.
  2. Select the desired mode (cool, fan, or dehumidify).
  3. Adjust the temperature and fan speed as needed.
  4. Use the timer function to set automatic on/off times.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The air conditioner includes a remote control for easy access and operation from a distance.

Care & Cleaning

Unplug the unit before cleaning. Use a dry cloth to wipe the exterior; do not use liquids or aerosols.

CAUTION! Ensure the air filter is cleaned regularly for optimal performance.

Regulatory Information

This air conditioner complies with applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit does not turn onPower supply issueCheck outlet and power cord.
No coolingIncorrect settingsEnsure unit is set to cool mode and temperature is set low enough.
Excessive noiseImproper installationCheck for loose parts or obstructions.
Water leakageFull water tankEmpty the water tank and ensure proper drainage.

Reset: Unplug the unit for 5 minutes to reset if needed.

Service: For assistance, contact Danby customer service.

Danby DAS180DBAHWDB Air Conditioner Manual © - All Rights Reserved 2026