Danby DAS170GBHWDB Air Conditioner Manual

The Danby DAS170GBHWDB is a 17,000 BTU portable air conditioner designed for efficient cooling in residential spaces. It features a sleek design, easy-to-use controls, and multiple cooling modes, including dehumidification. This unit is ideal for rooms up to 700 square feet and includes a remote control for added convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Customize your comfort level
Multiple Fan Speeds	Choose the right airflow for your needs
Built-in Dehumidifier	Reduces humidity while cooling

Installation

Unpack and inspect contents. Place the air conditioner in a suitable location.

Install the window kit: Follow the instructions to secure the unit in the window.
Connect the exhaust hose: Ensure it is properly attached to vent hot air outside.
Plug into AC power: Use a dedicated outlet for safety.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow the remote control instructions.

Set the desired temperature: Use the remote to adjust the thermostat.
Select cooling mode: Choose between cool, fan, or dehumidify modes.
Adjust fan speed: Select low, medium, or high based on your preference.

CAUTION! Ensure the air intake and exhaust are not obstructed.

Specifications

Cooling Capacity: 17,000 BTU.
Room Size: Up to 700 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.0.
Weight: 75 lbs.
Dimensions: 34" H x 19" W x 16" D.
Noise Level: 52 dB.

Controls and Settings

Access settings via the remote control or control panel on the unit. Features include temperature adjustment, fan speed selection, and mode settings.

Connecting Devices

Ensure the air conditioner is connected to a suitable power outlet. No additional devices are required for operation.

Operating the Air Conditioner

Follow the remote control instructions to operate the unit effectively.

Turn on the unit: Press the power button on the remote.
Adjust settings: Use the remote to set temperature and mode.
Monitor performance: Check the display for current settings.

WARNING! Do not block air intake or exhaust vents.

Accessibility Features

Remote control operation allows for easy access to settings without needing to reach the unit.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior; do not use abrasive cleaners.

CAUTION! Ensure the unit is dry before plugging back in.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unit not plugged in	Check power connection and outlet.
No cooling	Incorrect settings	Ensure unit is set to cool mode.
Excessive noise	Obstruction	Check for blockages around the unit.
Water leaking	Full tank	Empty the water tank as needed.

Reset: Unplug for 5 minutes to reset the unit.

Service: For assistance, contact customer service.