Danby DAS120GBHWDB Air Conditioner Manual

The Danby DAS120GBHWDB is a 12,000 BTU portable air conditioner designed for cooling spaces up to 550 square feet. It features a sleek design, easy-to-use controls, and multiple modes including cooling, fan, and dehumidification. The unit is equipped with a programmable thermostat, remote control, and a 24-hour timer for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 12,000 BTU cooling capacity, programmable thermostat, remote control, multiple fan speeds, and a dehumidification mode.

Feature	Description
Cooling Capacity	12,000 BTU for spaces up to 550 sq. ft.
Modes	Cooling, Fan, Dehumidification
Remote Control	Convenient control from a distance
24-Hour Timer	Programmable for energy savings
Filter	Reusable and washable air filter
Noise Level	Quiet operation for comfortable use

Installation

Unpack the air conditioner and inspect for any damage. Place the unit on a flat, stable surface near a window.

Install the window kit: Follow the instructions to fit the window kit to your window size.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into a power outlet: Ensure the outlet is grounded and rated for the unit's power.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit and follow the on-screen prompts to set your preferences.

Select cooling mode: Use the mode button to choose between cooling, fan, or dehumidification.
Set the temperature: Adjust the thermostat to your desired temperature.
Program the timer: Set the 24-hour timer for automatic operation.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Recommended Room Size: Up to 550 sq. ft.
Power Supply: 115V, 60Hz.
Energy Efficiency Ratio (EER): 12.0.
Noise Level: 52 dB (low setting).
Weight: 70 lbs.
Dimensions: 30" H x 18" W x 15" D.

Controls and Settings

Access controls via the front panel or remote control. Features include temperature adjustment, mode selection, and fan speed settings.

Remote: Power, Mode, Temperature Up/Down, Fan Speed, Timer.

Settings: Adjust temperature, select cooling mode, and set timer for operation.

Connecting Devices

No additional devices are required for operation. Ensure the unit is plugged into a suitable power outlet.

Turn off the unit before connecting to power.
Ensure the exhaust hose is properly attached to the window kit.

Tip: Regularly check the exhaust hose for any blockages.

Operating the Air Conditioner

To operate, press the power button and select your desired mode and temperature.

Press POWER to turn on the unit.
Select the cooling mode using the mode button.
Adjust the temperature using the up/down buttons.
Set the fan speed as desired.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter monthly.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For more information, visit the manufacturer's website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect mode	Ensure unit is set to cooling mode.
Excessive noise	Blocked air intake	Check and clear any obstructions.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Service: For further assistance, contact customer support.