Danby DAC9003 Air Conditioner Manual

The Danby DAC9003 is a 9,000 BTU portable air conditioner designed to cool spaces up to 350 square feet. It features a 3-in-1 functionality that includes cooling, dehumidifying, and fan modes. The unit is equipped with a digital thermostat, remote control, and a programmable timer for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital thermostat, remote control, programmable timer, three fan speeds, and a dehumidifier function.

Feature	Description
Cooling Capacity	9,000 BTU, suitable for rooms up to 350 sq. ft.
Dehumidifier Function	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on or off at specific times.
Digital Display	Easy-to-read temperature and mode settings.
Three Fan Speeds	Customize airflow to your preference.

Installation

Unpack and inspect contents. Place the unit on a flat, stable surface near a window.

Install the window kit: Follow the instructions to secure the window kit in place.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into an AC outlet: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure proper ventilation and avoid blocking air intake or exhaust.

First-Time Setup

Power on the unit; follow the on-screen prompts to set your preferences.

Select cooling mode: Use the mode button to choose between cooling, fan, or dehumidifying.
Set desired temperature: Adjust the thermostat to your preferred setting.
Program timer: Use the timer function to set the unit to operate at specific times.

CAUTION! Ensure the unit is properly installed before operating.

Specifications

Cooling Capacity: 9,000 BTU.
Room Size: Up to 350 sq. ft.
Power Supply: 115V, 60Hz.
Energy Efficiency Ratio (EER): 12.0.
Air Flow: 300 CFM.
Noise Level: 52 dB.
Dimensions: 30" H x 18" W x 15" D.
Weight: 60 lbs.

Controls and Settings

Access settings via the digital display or remote control. Controls include power, mode selection, temperature adjustment, and fan speed.

Remote: Power, mode, temperature up/down, fan speed, timer.

Connecting Devices

Ensure the unit is properly installed before connecting any additional devices.

Turn off the unit before making connections.
Use compatible extension cords if necessary, ensuring they meet power requirements.

Tip: Avoid using multiple devices on the same outlet to prevent overload.

Operating the Air Conditioner

To operate, press the power button, select the mode, and adjust the temperature as needed.

Press the power button to turn on the unit.
Select the cooling mode and set the desired temperature.
Adjust fan speed as needed for comfort.

WARNING! Do not block air intake or exhaust vents during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter monthly and ensure the unit is free of dust and debris.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power outlet and ensure the unit is plugged in.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode and the thermostat is adjusted.
Excessive noise	Obstruction or loose parts	Check for obstructions and ensure all parts are securely attached.
Water leakage	Full water tank	Empty the water tank and ensure proper drainage.

Reset: Unplug the unit for 10 seconds to reset.

Service: For assistance, contact customer service at 1-800-263-2629.