Danby DAC8007EE Air Conditioner Manual

The Danby DAC8007EE is a portable air conditioner designed to provide effective cooling for rooms up to 350 square feet. It features a 3-in-1 functionality, including cooling, dehumidifying, and fan modes. The unit is equipped with a remote control, programmable timer, and adjustable thermostat for user convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, programmable timer, and multiple cooling modes.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Programmable Timer	Set the unit to turn on/off automatically
Adjustable Thermostat	Customize your desired temperature
Multiple Modes	Cooling, dehumidifying, and fan modes

Installation

Unpack and inspect contents. Place the unit on a flat, stable surface.

Install the window kit: Follow the instructions to fit the kit into your window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and the voltage matches the unit's requirements.

WARNING! Ensure the unit is stable to avoid tipping over. Keep the area around the unit clear.

First-Time Setup

Power on the unit; follow the remote control prompts.

Select cooling mode: Use the mode button on the remote.
Set desired temperature: Adjust using the up/down buttons.
Program timer: Use the timer button to set on/off times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 8000 BTU.
Room Size: Up to 350 sq. ft.
Power Consumption: 800W.
Noise Level: 52 dB.
Refrigerant: R410A.
Dimensions: 28.5 x 17.5 x 14.5 inches.
Weight: 60 lbs.

Controls and Settings

Access settings via the remote control or control panel on the unit. Features include cooling mode selection, temperature adjustment, and fan speed settings.

Connecting Devices

Ensure the air conditioner is connected to a suitable power outlet. No additional devices are required for operation.

Operating the Air Conditioner

To operate, power on the unit and select your desired settings using the remote control.

Press the power button to turn on.
Select cooling mode and adjust the temperature.
Use the fan speed button to adjust airflow.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The remote control is designed for easy access and operation, making it user-friendly for individuals with mobility challenges.

Care & Cleaning

Unplug the unit before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use harsh chemicals or liquids.

CAUTION! Ensure the unit is dry before plugging it back in.

Regulatory Information

This air conditioner complies with all relevant safety and environmental regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unit not plugged in	Check power connection and outlet.
Insufficient cooling	Dirty filter	Clean or replace the air filter.
Unit making noise	Loose parts	Check for loose components and tighten.
Remote not working	Batteries	Replace batteries in the remote control.

Reset: Unplug the unit for 10 seconds to reset.

Service: 1-800-263-2629; www.danby.com