Danby DAC180EB3WDB Air Conditioner Manual

The Danby DAC180EB3WDB is an 18,000 BTU portable air conditioner designed for cooling large spaces. It features a sleek design, multiple cooling modes, a programmable timer, and a remote control for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 18,000 BTU cooling capacity, remote control, programmable timer, multiple fan speeds, and energy-saving mode.

Feature	Description
Cooling Capacity	18,000 BTU for large rooms
Remote Control	Convenient operation from a distance
Programmable Timer	Set cooling schedules for convenience
Multiple Fan Speeds	Customize airflow to your preference
Energy Saving Mode	Reduces power consumption

Installation

Unpack and inspect contents. Place the air conditioner on a stable surface near a window.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach the hose to the air conditioner and the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure the unit is securely installed to avoid accidents.

First-Time Setup

Power on the air conditioner; follow the remote control instructions.

Select cooling mode: Use the remote to choose between cooling, fan, or dehumidify modes.
Set temperature: Adjust the desired temperature using the remote control.
Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 18,000 BTU.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.0.
Air Flow: 500 CFM.
Noise Level: 52 dB.
Weight: 70 lbs.
Dimensions: 15.5 x 19.5 x 34.5 inches.

Controls and Settings

Access settings via the remote control. Controls include power, mode selection, temperature adjustment, and fan speed.

Remote: POWER, MODE, TEMP UP/DOWN, FAN SPEED, TIMER.

Connecting Devices

Ensure the air conditioner is properly connected to the power supply and window kit.

Turn off the unit before making any adjustments.
Ensure all connections are secure.

Tip: Regularly check connections for wear and tear.

Operating the Air Conditioner

Use the remote control to operate the air conditioner effectively.

Turn on the unit: Press the POWER button.
Select mode: Choose cooling or fan mode as needed.
Adjust temperature: Set your desired temperature using the remote.

WARNING! Do not block air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the filter monthly.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect mode	Ensure unit is set to cooling mode.
Excessive noise	Loose parts	Check for loose components and tighten.
Water leakage	Full tank	Empty the water tank as needed.

Reset: Unplug the unit for a few minutes to reset.

Service: For further assistance, contact customer service.