Danby DAC180EB2WDB Air Conditioner Manual

The Danby DAC180EB2WDB is an 18,000 BTU portable air conditioner designed for efficient cooling in residential spaces. It features a sleek design, easy-to-use controls, and multiple cooling modes. This unit is equipped with a programmable timer, remote control, and a dehumidifier function, making it ideal for maintaining comfort in various conditions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 18,000 BTU cooling capacity, Remote Control, Programmable timer, Dehumidifier function, Multiple cooling modes.

Feature	Description
Cooling Capacity	18,000 BTU for effective cooling
Remote Control	Convenient operation from a distance
Programmable Timer	Set the unit to turn on/off at desired times
Dehumidifier Function	Removes excess moisture from the air
Multiple Cooling Modes	Cool, Fan, and Dry modes for flexibility
Easy Installation	Includes window kit for quick setup
Energy Efficient	Designed to save on energy costs

Installation

Unpack and inspect contents. Place the unit on a stable surface near a window.

Install the window kit: Follow the included instructions to secure the kit.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable to avoid tipping. Follow all safety instructions.

First-Time Setup

Power on the unit; follow the remote control instructions.

Select cooling mode: Use the mode button to choose between Cool, Fan, and Dry.
Set temperature: Adjust the desired temperature using the up/down buttons.
Program timer: Use the timer function to set on/off times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 18,000 BTU.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.0.
Air Flow: 400 CFM.
Noise Level: 52 dB.
Dimensions: 15.5 x 18.5 x 30 inches.
Weight: 70 lbs.

Controls and Settings

Access settings via the remote control or control panel on the unit.

Remote: Power, Mode, Temperature, Timer, Fan Speed.

Settings include temperature adjustment, fan speed selection, and mode changes.

Connecting Devices

Ensure the unit is connected to a suitable power outlet.

Turn off the unit before connecting any devices.
Use the remote control for operation.

Tip: Keep the remote control within reach for convenience.

Operating the Air Conditioner

Follow these steps to operate the air conditioner effectively.

Power on the unit: Press the power button on the remote or unit.
Select cooling mode: Choose the desired mode using the remote.
Adjust temperature: Set your preferred temperature using the remote.
Monitor operation: Check the display for current settings and status.

WARNING! Do not block air intake or exhaust vents.

Accessibility Features

Remote control provides easy access to all functions for users with mobility challenges.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior.

CAUTION! Do not use harsh chemicals or liquids on the unit.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unit not plugged in	Check power connection and outlet.
Insufficient cooling	Dirty filter	Clean or replace the air filter.
Unit makes noise	Loose components	Check for loose parts and tighten if necessary.
Remote not working	Batteries	Replace batteries in the remote control.

Reset: Unplug the unit for 10 seconds to reset.

Service: For assistance, contact Danby customer service.