Danby DAC18030 Air Conditioner Manual

The Danby DAC18030 is an 18,000 BTU portable air conditioner designed for cooling spaces up to 1,000 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidifier functions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital thermostat, remote control, adjustable air vents, and a washable filter.

Feature	Description
Digital Thermostat	Allows precise temperature control.
Remote Control	Convenient operation from a distance.
Adjustable Air Vents	Directs airflow where needed.
Washable Filter	Easy maintenance for optimal performance.
Multiple Modes	Cooling, fan, and dehumidifying options.
Energy Efficient	Designed to save on energy costs.

Installation

Unpack and inspect contents. Place the unit on a flat surface near a window.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; set your desired temperature using the remote or control panel.

Select cooling mode: Choose between cool, fan, or dehumidify modes.
Set the temperature: Use the up/down buttons to adjust the temperature.
Timer settings: Program the timer for automatic on/off functionality.

CAUTION! Ensure the unit is properly installed before operating.

Specifications

Cooling Capacity: 18,000 BTU.
Coverage Area: Up to 1,000 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio: 12.1 EER.
Noise Level: 54 dB (low setting).
Dimensions: 15.5 x 18.5 x 30 inches.
Weight: 70 lbs.

Controls and Settings

Access settings via the digital display or remote control. Features include temperature adjustment, mode selection, and fan speed control.

Remote: Power, mode, temperature up/down, fan speed, timer.

Settings include: Temperature display, energy saver mode, and sleep mode.

Connecting Devices

No external devices are required for operation; however, ensure the unit is connected to a suitable power source.

Ensure the unit is off before connecting to power.
Use a grounded outlet to prevent electrical hazards.

Tip: Avoid using extension cords to ensure safety.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings.

Press the power button to turn on.
Select the cooling mode and set the temperature.
Adjust fan speed as needed.
Monitor the temperature and adjust settings for comfort.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The unit includes easy-to-read controls and a remote for convenient operation.

Care & Cleaning

Unplug the unit before cleaning. Use a damp cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Ensure the filter is cleaned regularly for optimal performance.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unit not plugged in	Check power connection and outlet.
Not cooling	Temperature setting too high	Lower the temperature setting.
Excessive noise	Improper installation	Ensure unit is level and secure.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 5 minutes to reset.

Service: For service inquiries, contact 1-800-263-2629 or visit www.danby.com.