Danby DAC18002 Air Conditioner Manual

The Danby DAC18002 is an 18,000 BTU portable air conditioner designed for cooling spaces up to 1,000 square feet. It features a 3-in-1 functionality, including cooling, dehumidifying, and fan modes. The unit is equipped with a remote control, programmable timer, and adjustable thermostat for optimal comfort. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 18,000 BTU cooling capacity, remote control, programmable timer, adjustable thermostat, and multiple fan speeds.

Feature	Description
Cooling capacity	18,000 BTU for spaces up to 1,000 sq. ft.
Dehumidifying function	Removes excess moisture from the air.
Remote control	Convenient operation from a distance.
Programmable timer	Set the unit to turn on/off at specific times.
Multiple fan speeds	Customize airflow to your preference.
Adjustable thermostat	Set your desired temperature easily.

Installation

Unpack and inspect contents. Place the air conditioner on a stable surface near a window.

Install the window kit: Follow the instructions to secure the window panel.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the air conditioner; follow the remote control prompts.

Set the mode: Use the mode button to select cooling, dehumidifying, or fan.
Adjust the temperature: Use the up/down buttons to set your desired temperature.
Set the timer: Program the unit to turn on or off at specific times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 18,000 BTU.
Coverage Area: Up to 1,000 sq. ft.
Power Supply: 115V/60Hz.
Dehumidification: Up to 3.5 pints/hour.
Fan Speeds: 3 speeds (high, medium, low).
Noise Level: 52 dB (low speed).
Dimensions: 15.5" x 18.5" x 30.5".
Weight: 70 lbs.

Controls and Settings

Access settings via the remote control or control panel. Features include mode selection, temperature adjustment, fan speed control, and timer settings.

Connecting Devices

Ensure the air conditioner is connected to a suitable power outlet. No additional devices are required for operation.

Operating the Air Conditioner

To operate, select the desired mode and temperature using the remote control or control panel.

Press the power button to turn on the unit.
Select the cooling mode and set the temperature.
Adjust fan speed as needed.

WARNING! Do not block the air intake or exhaust.

Accessibility Features

The remote control is designed for ease of use, with large buttons and clear labeling for accessibility.

Care & Cleaning

Unplug the unit before cleaning. Use a soft, dry cloth to clean the exterior; do not use liquids or aerosols.

CAUTION! Avoid spraying liquids directly on the unit.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power outlet and connections.
No cooling	Incorrect settings	Ensure unit is set to cooling mode.
Excessive noise	Improper installation	Check for secure installation and clear obstructions.
Water leakage	Full water tank	Empty the water tank and ensure proper drainage.

Reset: Unplug the unit for a few minutes to reset.

Service: For assistance, contact customer service at 1-800-263-2629.