Danby DAC120ECBIWDB Air Conditioner Manual

The Danby DAC120ECBIWDB is a 12,000 BTU portable air conditioner designed for cooling spaces up to 550 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidifier functions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a programmable timer.

Feature	Description
Portable Design	Easy to move from room to room.
Remote Control	Convenient operation from a distance.
Adjustable Thermostat	Set your desired temperature easily.
Multiple Fan Speeds	Customize airflow to your preference.
Programmable Timer	Set the air conditioner to turn on/off automatically.

Installation

Unpack and inspect contents. Place the air conditioner on a flat, stable surface.

Install the window kit: Follow the instructions to secure the unit in the window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and can handle the load.

WARNING! Ensure the unit is stable to avoid tipping.

First-Time Setup

Power on the unit; follow the on-screen prompts.

Set the desired temperature using the remote or control panel.
Select the cooling mode: Choose between cool, fan, or dehumidify.
Adjust fan speed as needed.

CAUTION! Ensure the unit is properly installed before operation.

Specifications

Cooling Capacity: 12,000 BTU.
Coverage Area: Up to 550 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio: 12.0 EER.
Noise Level: 52 dB.
Dimensions: 18.5 x 15 x 30 inches.
Weight: 70 lbs.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, fan speed selection, and mode switching.

Remote: POWER, MODE, TEMP, FAN, TIMER.

Settings: Adjust temperature, select cooling modes, and set timers for operation.

Connecting Devices

Ensure the air conditioner is properly connected to the power supply and window kit.

Turn off the unit before connecting any devices.
Follow the installation instructions for the window kit.

Tip: Ensure all connections are secure before operation.

Operating the Air Conditioner

To operate, use the remote or control panel to set your desired temperature and mode.

Press POWER to turn on the unit.
Select the cooling mode and adjust the temperature.
Use the fan speed settings to customize airflow.

WARNING! Do not block air intake or exhaust vents.

Accessibility Features

The air conditioner includes easy-to-read controls and a remote for convenient operation.

Care & Cleaning

Unplug the unit before cleaning. Use a soft, damp cloth to clean the exterior.

CAUTION! Do not use harsh chemicals or abrasive materials.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode.
Water leaks	Full tank	Empty the water tank and check connections.
Excessive noise	Improper installation	Ensure the unit is securely installed.

Reset: Unplug the unit for 10 seconds to reset.

Service: Contact customer service for further assistance.