Danby DAC120EB9WDB-6 Air Conditioner Manual

The Danby DAC120EB9WDB-6 is a 12,000 BTU portable air conditioner designed for cooling spaces up to 550 square feet. It features a dehumidifier function, multiple cooling speeds, and a programmable timer. The unit is equipped with a remote control for convenience and has a sleek design that fits well in any room. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 12,000 BTU cooling capacity, remote control, dehumidifier function, multiple fan speeds, programmable timer.

Feature	Description
Cooling Capacity	12,000 BTU, suitable for rooms up to 550 sq. ft.
Dehumidifier Function	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on or off at specific times.
Multiple Fan Speeds	Choose from different cooling speeds for comfort.
Energy Efficiency	Designed to save energy while providing effective cooling.

Installation

Unpack the air conditioner and inspect for any damage. Follow these steps for installation:

Choose a suitable location near a window for venting.
Install the window kit according to the instructions provided.
Connect the exhaust hose to the unit and the window kit.
Plug the unit into a grounded outlet.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select your desired cooling mode using the remote.
Set the temperature using the temperature control buttons.
Adjust fan speed as needed for comfort.

CAUTION! Ensure proper ventilation during operation.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 550 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.0.
Dehumidification: Up to 3.5 pints/hour.
Noise Level: 52 dB.
Weight: 70 lbs.

Controls and Settings

Access controls via the remote or the unit's control panel. Features include:

Remote: Power, temperature settings, fan speed, mode selection.

Settings: Adjust temperature, set timer, and switch between cooling and dehumidifying modes.

Connecting Devices

Ensure the air conditioner is properly connected to a power source. Follow these steps:

Turn off the unit before connecting any devices.
Ensure the power outlet is grounded.
Use the remote control for operation.

Tip: Keep the area around the unit clear for optimal airflow.

Operating the Air Conditioner

To operate the air conditioner:

Press the power button to turn on the unit.
Select the desired cooling mode using the remote.
Adjust the temperature and fan speed as needed.
Use the timer function to set operating hours.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Clean or replace the air filter every month.
Check the exhaust hose for blockages.
Wipe the exterior with a damp cloth.

CAUTION! Unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards. For more information, visit the manufacturer's website or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power outlet and connections.
No cooling	Incorrect settings	Ensure unit is set to cooling mode.
Excessive noise	Blocked air intake	Clear any obstructions around the unit.
Water leakage	Full water tank	Empty the water tank as needed.

Reset: Refer to the user manual for reset instructions.

Service: For support, contact customer service.