Danby DAC120EB8WDB Air Conditioner Manual

The Danby DAC120EB8WDB is a 12,000 BTU portable air conditioner designed for cooling spaces up to 550 square feet. It features a dehumidifier function, multiple cooling speeds, and a programmable timer. The unit is equipped with a remote control for convenience and has an energy-efficient design to help reduce electricity costs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Maintenance and Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 12,000 BTU cooling capacity, dehumidifier function, remote control, programmable timer, energy-efficient design.

Feature	Description
Cooling Capacity	12,000 BTU, suitable for spaces up to 550 sq. ft.
Dehumidifier Function	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off at specific times.
Energy Efficiency	Designed to reduce electricity costs.

Installation

Unpack and inspect contents. Place the unit on a stable surface near a window.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into a power outlet: Ensure the outlet is grounded and can handle the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow the remote control instructions.

Select cooling mode: Use the mode button on the remote to choose cooling or dehumidifying.
Set temperature: Adjust the temperature using the up/down buttons.
Program timer: Use the timer button to set the desired on/off times.

CAUTION! Ensure the unit is properly installed before operation.

Specifications

Cooling Capacity: 12,000 BTU.
Coverage Area: Up to 550 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.0.
Noise Level: 52 dB.
Weight: 70 lbs.
Dimensions: 30" H x 18" W x 15" D.

Controls and Settings

Access controls via the remote or the unit's control panel. Features include power, mode selection, temperature adjustment, and fan speed settings.

Connecting to Power

Ensure the unit is plugged into a grounded outlet. Avoid using extension cords.

Check the power requirements: Ensure the outlet matches the unit's voltage.
Plug in the unit: Insert the plug into the outlet securely.

Tip: Use a dedicated circuit for optimal performance.

Operating the Air Conditioner

Follow the remote control instructions to operate the air conditioner.

Turn on the unit: Press the power button on the remote or unit.
Select cooling mode: Choose the desired mode using the remote.
Adjust settings: Use the remote to change temperature and fan speed.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Cleaning

Regular maintenance is essential for optimal performance. Unplug the unit before cleaning.

Clean the air filter: Remove and wash the filter regularly.
Wipe the exterior: Use a damp cloth to clean the outer surfaces.

CAUTION! Do not use harsh chemicals or abrasive materials.

Regulatory Information

This unit complies with FCC regulations and is certified for residential use. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power outlet and connections.
No cooling	Incorrect settings	Ensure cooling mode is selected and temperature is set correctly.
Excessive noise	Obstruction or malfunction	Check for blockages and ensure the unit is level.
Water leakage	Full water tank	Empty the water tank and check for proper drainage.

Reset: Unplug the unit for 10 minutes to reset.

Service: For assistance, contact customer service at 1-800-263-2629.