Danby DAC120EB7WDB Air Conditioner Manual

The Danby DAC120EB7WDB is a 12,000 BTU portable air conditioner designed to cool spaces up to 550 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including cooling, dehumidifying, and fan-only options. This unit is equipped with a programmable timer, remote control, and energy-saving features to enhance comfort and efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 12,000 BTU cooling capacity, remote control, programmable timer, multiple fan speeds, and dehumidifying function.

Feature	Description
Cooling Capacity	12,000 BTU, suitable for rooms up to 550 sq. ft.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on or off at specific times.
Dehumidifying Function	Removes excess moisture from the air.
Multiple Fan Speeds	Customize airflow to your preference.
Energy Efficiency	Designed to save energy while cooling.
Easy Installation	Includes all necessary installation accessories.

Installation

Unpack and inspect the air conditioner. Place it in a suitable location near a window for venting.

Attach the exhaust hose to the unit and window kit.
Secure the window kit in the window frame.
Plug the unit into a grounded outlet.
Ensure the unit is level for optimal operation.

WARNING! Ensure proper ventilation to avoid overheating. Follow all safety instructions.

First-Time Setup

Power on the air conditioner and set your desired cooling mode.

Select cooling mode using the remote or control panel.
Adjust the temperature setting to your preference.
Set the fan speed according to your comfort level.
Use the timer function to schedule operation times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 550 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.0.
Noise Level: 52 dB.
Dimensions: 30.5 x 18.5 x 15 inches.
Weight: 70 lbs.

Controls and Settings

Access settings via the control panel or remote. Controls include power, mode selection, temperature adjustment, and fan speed.

Remote: Power, mode, temperature, fan speed, timer.

Settings: Adjust temperature, select cooling mode, and set timer for operation.

Connecting Devices

No additional devices are required for operation. Ensure the air conditioner is plugged into a suitable power outlet.

Operating the Air Conditioner

To operate, use the remote or control panel to select your desired settings.

Press the power button to turn on the unit.
Select the cooling mode and adjust the temperature.
Set the fan speed and timer as needed.
Monitor the room temperature for optimal comfort.

WARNING! Do not block air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean or replace the air filter monthly.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No cooling	Incorrect settings	Check mode and temperature settings.
Unit not turning on	Power supply issue	Ensure unit is plugged in and outlet is functional.
Excessive noise	Improper installation	Check for loose parts and ensure level installation.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 5 minutes to reset.

Service: For assistance, contact customer service at 1-800-263-2629.