Danby DAC120EB6WDB-6 Air Conditioner Manual

The Danby DAC120EB6WDB-6 is a 12,000 BTU portable air conditioner designed to cool spaces up to 550 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidifier settings. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 12,000 BTU cooling capacity, remote control, programmable timer, adjustable thermostat, and multiple fan speeds.

Feature	Description
Cooling Capacity	12,000 BTU, suitable for rooms up to 550 sq. ft.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off at specific times.
Adjustable Thermostat	Customize your comfort level.
Multiple Fan Speeds	Choose from low, medium, and high settings.

Installation

Unpack the air conditioner and inspect for any damage. Follow these steps for installation:

Choose a suitable location near a window for venting.
Install the window kit according to the instructions provided.
Connect the exhaust hose to the unit and the window kit.
Plug the unit into a grounded outlet.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts to set your preferences.

Select cooling mode: Press the mode button to cycle through options.
Set desired temperature using the up/down buttons.
Adjust fan speed as needed.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 550 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.0.
Dimensions: 30.5 x 18.5 x 15.5 inches.
Weight: 70 lbs.
Noise Level: 52 dB (low setting).

Controls and Settings

Access controls via the front panel or remote. Features include power, mode selection, temperature adjustment, and fan speed settings.

Remote: Power, mode, temperature, fan speed, and timer controls.

Connecting to Power

Ensure the air conditioner is plugged into a dedicated outlet. Avoid using extension cords.

Check the power supply voltage matches the unit's requirements.
Ensure the outlet is grounded.

Tip: Regularly check the power cord for damage.

Operating the Air Conditioner

To operate the air conditioner:

Press the power button to turn on.
Select your desired cooling mode.
Adjust the temperature and fan speed as needed.
Use the timer function to set operating hours.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Follow these guidelines:

Clean or replace the air filter every month.
Wipe the exterior with a damp cloth.
Check the exhaust hose for blockages.

CAUTION! Always unplug the unit before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Incorrect settings	Ensure cooling mode is selected.
Excessive noise	Loose components	Check for loose parts and tighten.
Water leakage	Blocked drain	Clear any blockages in the drain.

Reset: Unplug the unit for 5 minutes to reset.