Danby DAC120EB3WDB Air Conditioner Manual

The Danby DAC120EB3WDB is a 12,000 BTU portable air conditioner designed for cooling spaces up to 550 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidifier functions. This unit is equipped with a remote control, programmable timer, and energy-saving features to ensure optimal comfort and efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 12,000 BTU cooling capacity, remote control, programmable timer, multiple fan speeds, and a dehumidifier function.

Feature	Description
Cooling Capacity	12,000 BTU, suitable for rooms up to 550 sq. ft.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on or off at specific times.
Multiple Fan Speeds	Choose from low, medium, and high settings.
Dehumidifier Function	Removes excess moisture from the air.
Energy Efficiency	Designed to save energy and reduce costs.

Installation

Unpack and inspect contents. Place the air conditioner on a stable surface near a window.

Install the window kit: Follow the instructions to secure the window panel.
Connect the exhaust hose: Attach one end to the unit and the other to the window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow the remote control instructions.

Select cooling mode: Use the mode button on the remote.
Set desired temperature: Adjust using the temperature controls.
Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Model: Danby DAC120EB3WDB.
Cooling Capacity: 12,000 BTU.
Room Size: Up to 550 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.1.
Dimensions: 31.5 x 18.5 x 15.5 inches.
Weight: 70 lbs.

Controls and Settings

Access settings via the remote control or the unit's control panel. Features include temperature adjustment, fan speed selection, and mode settings.

Connecting Devices

Ensure the air conditioner is plugged in and powered on before connecting any additional devices.

Use the remote control for operation.
Connect any smart home devices as per their instructions.

Tip: Keep the remote control within range for optimal performance.

Operating the Air Conditioner

Follow the instructions to operate the air conditioner effectively.

Turn on the unit: Press the power button on the remote or unit.
Select cooling mode: Choose from cool, fan, or dehumidify.
Adjust settings: Use the remote to set temperature and fan speed.

WARNING! Do not block air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean or replace the air filter monthly.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unit not plugged in	Check power connection and outlet.
No cooling	Incorrect settings	Ensure unit is set to cooling mode.
Excessive noise	Improper installation	Check for secure installation and level placement.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 5 minutes to reset.

Service: 1-800-263-2629; www.danby.com