Danby DAC120EB1WDB Air Conditioner Manual

The Danby DAC120EB1WDB is a 12,000 BTU portable air conditioner designed for cooling spaces up to 550 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including dehumidification and fan-only options. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a programmable timer.

Feature	Description
Cooling Capacity	12,000 BTU for effective cooling
Dehumidification	Removes excess moisture from the air
Remote Control	Convenient operation from a distance
Programmable Timer	Set the unit to turn on/off at specific times
Adjustable Thermostat	Customize your comfort level

Installation

Unpack the air conditioner and inspect for any damage. Follow these steps for installation:

Choose a suitable location near a window.
Install the window kit according to the instructions.
Connect the exhaust hose to the unit and window kit.
Plug the unit into a grounded outlet.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select your desired cooling mode using the remote.
Set the temperature using the adjustable thermostat.
Program the timer if needed.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Air Flow: 350 CFM.
Energy Efficiency Ratio (EER): 12.0.
Noise Level: 52 dB.
Power Supply: 115V/60Hz.
Weight: 70 lbs.
Dimensions: 30" H x 18" W x 15" D.

Controls and Settings

Access settings via the remote control or the unit's control panel. Features include temperature adjustment, fan speed selection, and mode selection.

Connecting Devices

Ensure the air conditioner is connected to a power source. No additional devices are required for operation.

Operating the Air Conditioner

To operate the air conditioner:

Press the power button to turn on the unit.
Select the cooling mode and set the desired temperature.
Adjust fan speed as needed.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter monthly and ensure the unit is free from dust and debris.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode.
Excessive noise	Loose components	Check for loose parts and tighten as needed.
Water leakage	Clogged drain	Inspect and clear the drain line.

Service: For further assistance, contact customer support.