Danby DAC120BFCWDB Air Conditioner Manual

The Danby DAC120BFCWDB is a 12,000 BTU portable air conditioner designed for cooling spaces up to 550 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidifier functions. This unit is equipped with a remote control, programmable timer, and energy-saving features to ensure optimal comfort and efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Maintenance and Cleaning 9. Troubleshooting

Features at a Glance

Key components: 12,000 BTU cooling capacity, remote control, programmable timer, multiple fan speeds, and dehumidification mode.

Feature	Description
Cooling Capacity	12,000 BTU, suitable for rooms up to 550 sq. ft.
Remote Control	Convenient control from a distance.
Programmable Timer	Set the unit to turn on/off automatically.
Multiple Fan Speeds	Choose from low, medium, or high settings.
Dehumidifier Function	Reduces humidity levels in the room.
Energy Efficiency	Designed to save energy and reduce costs.

Installation

Unpack the air conditioner and inspect for any damage. Follow these steps for installation:

Choose a suitable location near a window for venting.
Install the window kit according to the included instructions.
Connect the exhaust hose to the unit and window kit.
Plug the unit into a grounded outlet.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select cooling mode using the remote control.
Set your desired temperature using the temperature controls.
Adjust fan speed as needed for comfort.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 550 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.1.
Weight: 70 lbs.
Dimensions: 30.5 x 18.5 x 15.5 inches.
Noise Level: 52 dB.

Controls and Settings

Access settings via the remote control or the control panel on the unit. Key controls include:

Remote: Power, temperature adjustment, fan speed, mode selection.

Settings include cooling, fan, and dehumidification modes.

Connecting to Power

Ensure the air conditioner is plugged into a grounded outlet. Avoid using extension cords.

Check the power supply voltage matches the unit's requirements.
Ensure the outlet is functional before plugging in the unit.

Tip: Use a dedicated circuit for optimal performance.

Operating the Air Conditioner

To operate the air conditioner:

Press the power button to turn on the unit.
Select your desired cooling mode and temperature.
Adjust fan speed as needed.
Monitor the room temperature for comfort.

WARNING! Do not block air intake or exhaust vents.

Maintenance and Cleaning

Regular maintenance is essential for optimal performance:

Clean or replace the air filter monthly.
Wipe down the exterior with a damp cloth.
Ensure the exhaust hose is clear of obstructions.

CAUTION! Unplug the unit before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect settings	Ensure cooling mode is selected and temperature is set correctly.
Excessive noise	Obstructions	Check for blockages around the unit.
Water leakage	Full water tank	Empty the water tank and ensure proper drainage.

Service: For further assistance, contact customer support.