Danby DAC120B6WDB-6 Air Conditioner Manual

The Danby DAC120B6WDB-6 is a 12,000 BTU air conditioner designed for cooling spaces up to 550 square feet. It features a sleek design, energy-efficient operation, and multiple cooling modes, including fan and dehumidification settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Remote control, adjustable thermostat, multiple fan speeds, energy saver mode, and programmable timer.

FeatureDescription
Remote ControlConveniently adjust settings from a distance
Adjustable ThermostatSet your desired temperature easily
Multiple Fan SpeedsChoose from low, medium, or high fan settings
Energy Saver ModeAutomatically turns off the compressor when the desired temperature is reached
Programmable TimerSet the air conditioner to turn on or off at specific times

Installation

Unpack and inspect contents. Ensure the unit is placed on a stable surface.

  1. Install the window kit: Follow the included instructions to fit the unit into your window.
  2. Connect the power supply: Ensure the unit is plugged into a grounded outlet.
  3. Adjust the side panels: Make sure they fit snugly against the window frame.
  4. Test the unit: Turn on the air conditioner to ensure it operates correctly.

WARNING! Ensure the unit is securely installed to avoid accidents.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

  1. Set the desired temperature using the remote control.
  2. Select the cooling mode: Choose between cool, fan, or dehumidify.
  3. Adjust fan speed as needed.
  4. Program the timer if desired.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Controls and Settings

Access settings via the remote control or control panel on the unit. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: POWER, MODE, FAN, TEMP UP/DOWN, TIMER.

Settings: Adjust temperature, select cooling modes, and set timers for operation.

Connecting Devices

Ensure the air conditioner is connected to a suitable power outlet. No additional devices are required for operation.

  1. Check the power supply before connecting.
  2. Ensure the unit is properly installed in the window.
  3. Use the remote control for operation.

Tip: Keep the area around the unit clear for optimal airflow.

Operating the Air Conditioner

To operate, use the remote control or the control panel on the unit.

  1. Press POWER to turn on the unit.
  2. Select the desired mode (cool, fan, dehumidify).
  3. Adjust the temperature and fan speed as needed.
  4. Use the timer function to schedule operation.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The air conditioner includes a remote control for easy access and operation from a distance.

Care & Cleaning

Unplug the unit before cleaning. Use a soft, dry cloth to wipe the exterior; do not use liquids or aerosols.

CAUTION! Avoid spraying liquids directly on the unit.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit does not turn onPower supply issueCheck power outlet and connections.
No coolingIncorrect settingsEnsure unit is set to cool mode and temperature is set correctly.
Excessive noiseImproper installationCheck for loose parts and ensure unit is securely installed.
Remote not workingBatteriesReplace batteries in the remote control.

Reset: Unplug the unit for 10 seconds to reset.

Service: For assistance, contact Danby customer service.

Danby DAC120B6WDB-6 Air Conditioner Manual © - All Rights Reserved 2026