Danby DAC120B5WDB-6 Air Conditioner Manual

The Danby DAC120B5WDB-6 is a 12,000 BTU portable air conditioner designed to cool spaces up to 550 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidification settings. The unit is equipped with a remote control, programmable timer, and energy-saving features to enhance comfort and efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital display, remote control, adjustable thermostat, multiple fan speeds, and a washable air filter.

Feature	Description
Cooling Capacity	12,000 BTU, suitable for rooms up to 550 sq. ft.
Modes	Cool, Fan, Dehumidify
Remote Control	Convenient operation from a distance
Programmable Timer	Set on/off times for energy savings
Washable Filter	Easy to clean for optimal performance
Energy Efficiency	Energy Star rated for lower energy consumption

Installation

Unpack and inspect contents. Place the unit on a flat, stable surface near a window.

Install the window kit: Follow the included instructions to secure the window kit.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into a power outlet: Ensure the outlet is grounded and meets the unit's requirements.

WARNING! Ensure the unit is stable to avoid tipping. Do not block airflow.

First-Time Setup

Power on the unit; follow the display prompts.

Select cooling mode: Use the mode button to choose between Cool, Fan, or Dehumidify.
Set desired temperature: Adjust the thermostat using the up/down buttons.
Program timer: Set the on/off timer as needed.

CAUTION! Ensure the unit is properly installed before operation.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 550 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.1.
Noise Level: 52 dB (low setting).
Dimensions: 30.5 x 18.5 x 15.5 inches.
Weight: 70 lbs.

Controls and Settings

Access settings via the digital display or remote control. Front panel includes power, mode, and temperature controls.

Remote: Power, Mode, Temperature, Timer, Fan Speed.

Adjust settings for optimal comfort and efficiency.

Connecting Devices

Ensure the air conditioner is properly installed before connecting any additional devices.

Turn off the unit before connecting any devices.
Use compatible extension cords if necessary, ensuring they meet power requirements.

Tip: Avoid using multiple devices on the same outlet to prevent overload.

Operating the Air Conditioner

To operate the air conditioner, follow the steps outlined in the first-time setup section.

Press the power button to turn on the unit.
Select the desired mode and temperature.
Adjust fan speed as needed.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter monthly and ensure the unit is free of dust and debris.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For more information, visit the manufacturer's website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Incorrect settings	Ensure unit is set to Cool mode.
Excessive noise	Obstruction or loose parts	Check for blockages and tighten loose components.
Water leakage	Full water tank	Empty the water tank and check for proper drainage.

Reset: Unplug the unit for 5 minutes, then plug back in to reset.

Service: For assistance, contact customer support.