Danby DAC12099 Air Conditioner Manual

The Danby DAC12099 is a 12,000 BTU portable air conditioner designed to cool spaces up to 550 square feet. It features a dehumidifier function, multiple fan speeds, and a programmable timer for convenience. The unit is equipped with a remote control, easy-to-use digital controls, and a washable air filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, digital display, adjustable thermostat, multiple cooling modes.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Digital Display	Easy-to-read temperature and settings
Adjustable Thermostat	Customize your comfort level
Multiple Cooling Modes	Cool, fan, and dehumidify options
Washable Air Filter	Easy maintenance for optimal performance

Installation

Unpack and inspect contents. Place the unit in a suitable location.

Install the window kit: Follow the instructions to fit the window kit securely.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow the on-screen prompts.

Set the desired temperature: Use the digital controls to adjust the thermostat.
Select cooling mode: Choose between cool, fan, or dehumidify modes.
Set the timer: Program the unit to turn on or off at specific times.

CAUTION! Ensure the unit is properly installed before operation.

Specifications

Cooling Capacity: 12,000 BTU.
Coverage Area: Up to 550 square feet.
Power Supply: 115V/60Hz.
Air Flow: Adjustable fan speeds.
Dehumidification: Up to 3.5 pints per hour.
Noise Level: 52 dBA.
Dimensions: 30 x 18 x 15 inches.

Controls and Settings

Access settings via the digital display or remote control. Features include temperature adjustment, fan speed selection, and mode switching.

Remote: POWER, MODE, TEMP UP/DOWN, TIMER, FAN SPEED.

Settings: Adjust temperature, select cooling modes, and set timers for convenience.

Connecting Devices

Ensure the unit is properly connected to a power source and the window kit is securely installed.

Turn off the unit before making any adjustments.
Ensure all connections are secure and properly fitted.

Tip: Regularly check connections to maintain optimal performance.

Operating the Air Conditioner

To operate the air conditioner, follow these steps:

Power on the unit using the remote or control panel.
Select the desired cooling mode and temperature.
Adjust fan speed as needed for comfort.
Monitor the temperature and adjust settings as necessary.

WARNING! Do not block air intake or exhaust vents.

Accessibility Features

Remote control allows for easy operation from a distance, making it accessible for users with mobility challenges.

Care & Cleaning

Unplug the unit before cleaning. Use a dry cloth to wipe the exterior; do not use liquids or aerosols.

CAUTION! Ensure the unit is dry before plugging it back in.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode.
Excessive noise	Improper installation	Check for secure installation and obstructions.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 10 seconds to reset.

Service: For assistance, contact customer service at 1-800-xxx-xxxx.