Danby DAC100B5WDB Air Conditioner Manual

The Danby DAC100B5WDB is a 10,000 BTU portable air conditioner designed to cool spaces up to 450 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidifier functions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 10,000 BTU cooling capacity, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Cooling Capacity	10,000 BTU, suitable for rooms up to 450 sq. ft.
Remote Control	Convenient operation from a distance.
Adjustable Thermostat	Set your desired temperature easily.
Multiple Fan Speeds	Choose from low, medium, or high fan settings.
Built-in Dehumidifier	Helps reduce humidity levels in the room.
Energy Efficient	Designed to save on energy costs.
Portable Design	Easy to move from room to room.

Installation

Unpack and inspect contents. Place the unit on a flat, stable surface near a window.

Install the window kit: Follow the instructions to secure the window kit in place.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure the unit is stable to avoid tipping. Follow all safety instructions.

First-Time Setup

Power on the unit; follow the remote control instructions.

Set the desired temperature using the remote control.
Select the cooling mode: Choose from cool, fan, or dehumidify.
Adjust fan speed as needed.

CAUTION! Ensure the unit is properly installed before operating.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 450 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.0.
Noise Level: 52 dB (low speed).
Weight: 70 lbs.
Dimensions: 30" H x 18" W x 15" D.

Controls and Settings

Access settings via the remote control or the control panel on the unit. Features include temperature adjustment, fan speed selection, and mode settings.

Connecting Devices

The unit does not require additional devices for operation. Ensure proper installation for optimal performance.

Operating the Air Conditioner

To operate, use the remote control or the control panel. Adjust settings as needed for comfort.

Maintenance and Care

Regularly clean the air filter and ensure the unit is free from obstructions.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Improper installation	Ensure exhaust hose is connected properly.
Excessive noise	Obstruction or loose parts	Check for obstructions and tighten loose components.
Water leakage	Full water tank	Empty the water tank and check for proper drainage.

Reset: Unplug the unit for 5 minutes to reset.

Service: Contact customer service for further assistance.