Danby DAC10059 Air Conditioner Manual

The Danby DAC10059 is a 10,000 BTU portable air conditioner designed for cooling spaces up to 450 square feet. It features a dehumidifier function, multiple fan speeds, and a programmable timer for convenience. The unit is equipped with a remote control, easy-to-use digital display, and a washable air filter for optimal performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 10,000 BTU cooling capacity, remote control, digital display, washable air filter, programmable timer.

Feature	Description
Cooling capacity	10,000 BTU, suitable for rooms up to 450 sq. ft.
Dehumidifier function	Removes excess moisture from the air.
Remote control	Convenient operation from a distance.
Programmable timer	Set the unit to turn on/off at specific times.
Washable air filter	Easy to clean for better air quality.
Multiple fan speeds	Customize airflow to your preference.
Digital display	Easy-to-read control panel.

Installation

Unpack and inspect contents. Place the unit on a stable surface near a window.

Install the window kit: Follow instructions to secure the exhaust hose.
Plug into a grounded outlet: Ensure the power supply matches the unit's requirements.
Turn on the unit: Use the power button or remote control.

WARNING! Ensure proper ventilation and avoid blocking air intake or exhaust.

First-Time Setup

Power on the unit; follow on-screen prompts to set preferences.

Select cooling mode: Use the mode button to choose between cooling and dehumidifying.
Set temperature: Adjust the desired temperature using the up/down buttons.
Program timer: Use the timer function to set operation times.

CAUTION! Ensure the unit is level for optimal performance.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 450 sq. ft.
Power Supply: 115V, 60Hz.
Air Flow: Adjustable fan speeds.
Dehumidification: Up to 2.5 pints per hour.
Noise Level: 52 dB (low speed).
Weight: 70 lbs.

Controls and Settings

Access settings via the digital display or remote control. Controls include power, mode selection, temperature adjustment, and fan speed.

Remote: Power, mode, temperature, fan speed, timer.

Settings: Adjust cooling, fan speed, and timer for personalized comfort.

Connecting Devices

Ensure the unit is properly connected to a power source. Use the remote control for operation.

Turn on the unit and remote control.
Ensure the remote has fresh batteries.
Point the remote at the unit for effective control.

Tip: Keep the remote within range for optimal performance.

Operating the Air Conditioner

Use the remote or control panel to operate the air conditioner.

Press the power button to turn on the unit.
Select the desired mode (cooling or dehumidifying).
Adjust the temperature and fan speed as needed.
Use the timer function for scheduled operation.

WARNING! Do not block air intake or exhaust vents.

Accessibility Features

The unit is designed for ease of use, with a remote control and clear digital display for accessibility.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Ensure the air filter is cleaned regularly for optimal performance.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode.
Excessive noise	Improper installation	Ensure the unit is level and properly installed.
Remote not working	Batteries	Replace batteries in the remote control.
Water leakage	Full water tank	Empty the water tank as per instructions.

Reset: Unplug the unit for a few minutes to reset.

Service: For assistance, contact Danby customer service.