Danby DAC080EECB2GDB Air Conditioner Manual

The Danby DAC080EECB2GDB is an 8,000 BTU portable air conditioner designed to cool spaces up to 350 square feet. It features a dehumidifier function, a remote control, and a 24-hour programmable timer. This unit is equipped with a washable air filter, adjustable fan speeds, and a sleek design that fits well in any room. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 8,000 BTU cooling capacity, remote control, adjustable fan speeds, dehumidifier function, washable air filter.

Feature	Description
Cooling Capacity	8,000 BTU, suitable for rooms up to 350 sq. ft.
Dehumidifier Function	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Programmable Timer	24-hour timer for scheduled operation.
Washable Air Filter	Easy to clean and maintain.
Adjustable Fan Speeds	Customize airflow to your preference.

Installation

Unpack and inspect contents. Place the air conditioner on a stable surface near a window.

Install the window kit: Follow the instructions to secure the window panel.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the unit is plugged into a grounded outlet.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the air conditioner; follow the remote control prompts.

Set the desired temperature: Use the remote or control panel to adjust.
Select fan speed: Choose between low, medium, or high settings.
Activate the dehumidifier mode if needed.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 8,000 BTU.
Room Size: Up to 350 sq. ft.
Power Supply: 115V/60Hz.
Air Flow: Adjustable fan speeds (low, medium, high).
Dehumidification: Up to 1.5 pints per hour.
Noise Level: 52 dB (low setting).
Dimensions: 17.5 x 13.5 x 28.5 inches.
Weight: 60 lbs.

Controls and Settings

Access settings via the remote control or control panel. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: Power, temperature controls, fan speed, mode selection.

Settings: Adjust temperature, set timer, and switch between cooling and dehumidifying modes.

Connecting Devices

No additional devices are required for operation. Ensure proper power supply connection.

Turn off the unit before connecting to power.
Ensure the power outlet is grounded.

Tip: Use a surge protector for added safety.

Operating the Air Conditioner

To operate, use the remote control or the control panel.

Power on the unit: Press the power button.
Set the desired temperature and fan speed.
Monitor the room temperature and adjust settings as needed.

WARNING! Do not block air intake or exhaust vents.

Maintenance and Care

Regular maintenance ensures optimal performance. Clean the air filter monthly and check for any obstructions.

CAUTION! Unplug the unit before cleaning.

Regulatory Information

This unit complies with all applicable safety standards. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power supply	Check power connection and outlet.
No cooling	Incorrect settings	Ensure cooling mode is selected and temperature is set correctly.
Excessive noise	Obstruction or improper installation	Check for blockages and ensure proper installation.
Water leakage	Full water tank	Empty the water tank and check for proper drainage.

Reset: Unplug the unit for 10 minutes to reset.

Service: For assistance, contact customer service at 1-800-263-2629.