Danby DAC080EB7WDB Air Conditioner Manual

The Danby DAC080EB7WDB is an 8,000 BTU portable air conditioner designed to cool spaces up to 350 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidifier functions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Set your desired temperature easily
Multiple Fan Speeds	Customize airflow to your preference
Built-in Dehumidifier	Reduces humidity for added comfort

Installation

Unpack and inspect contents. Place the air conditioner in a suitable location.

Install the window kit: Follow the instructions to secure the unit in the window.
Connect the exhaust hose: Ensure it is properly attached to vent hot air outside.
Plug into AC power: Use a grounded outlet.

WARNING! Ensure the unit is stable and secure to avoid accidents.

First-Time Setup

Power on the unit; follow the on-screen prompts.

Select cooling mode: Use the mode button to choose between cooling, fan, and dehumidifier.
Set desired temperature: Adjust using the temperature controls.
Adjust fan speed: Choose low, medium, or high based on your comfort.

CAUTION! Ensure the unit is placed on a flat surface for optimal performance.

Specifications

Cooling Capacity: 8,000 BTU.
Coverage Area: Up to 350 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio: 12.1 EER.
Noise Level: 52 dB.
Weight: 60 lbs.
Dimensions: 18.5 x 15 x 30 inches.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, mode selection, and fan speed control.

Remote: Power, mode, temperature, fan speed, and timer settings.

Connecting Devices

No external devices are required for operation; however, ensure the unit is connected to a suitable power source.

Operating the Air Conditioner

Follow the instructions for optimal cooling performance.

Turn on the unit: Press the power button.
Select cooling mode: Choose your desired mode.
Adjust temperature and fan speed as needed.

WARNING! Do not block air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter monthly and ensure the unit is free of dust.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect settings	Ensure unit is set to cooling mode.
Excessive noise	Obstruction	Check for blockages around the unit.
Water leakage	Full water tank	Empty the water tank as needed.

Reset: Unplug for 10 seconds to reset the unit.

Service: 1-877-326-2499; www.danby.com