Danby DAC060EB4WDB Air Conditioner Manual

The Danby DAC060EB4WDB is a 6000 BTU portable air conditioner designed for cooling small to medium-sized rooms. It features a sleek design, easy-to-use controls, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and programmable timer.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Set your desired temperature easily
Multiple Fan Speeds	Customize airflow to your preference
Programmable Timer	Set the unit to turn on/off at specific times

Installation

Unpack and inspect contents. Place the air conditioner on a flat surface near a window.

Install the window kit: Follow the instructions to fit the window kit securely.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select cooling mode: Use the mode button to choose between cooling, fan, and dehumidify.
Set temperature: Adjust the thermostat to your desired level.
Set fan speed: Choose from low, medium, or high settings.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 6000 BTU.
Energy Efficiency Ratio (EER): 12.0.
Power Supply: 115V/60Hz.
Air Flow: 200 CFM.
Noise Level: 52 dB.
Weight: 50 lbs.
Dimensions: 28 x 18 x 15 inches.

Controls and Settings

Access settings via the control panel or remote control. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: Power, mode, temperature up/down, fan speed, and timer.

Connecting Devices

Ensure the air conditioner is properly connected to the power supply and exhaust hose is securely attached to the window kit.

Turn off the unit before making any connections.
Ensure all connections are tight and secure.

Tip: Regularly check connections for wear and tear.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings using the control panel or remote.

Press the power button to turn on.
Select the cooling mode and adjust the temperature.
Monitor the room temperature and adjust settings as needed.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter monthly and ensure the unit is free from dust and debris.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect settings	Ensure cooling mode is selected and temperature is set correctly.
Excessive noise	Loose parts	Check for loose components and tighten as necessary.
Water leakage	Clogged drain	Inspect and clear the drain line.

Reset: Unplug the unit for 10 seconds to reset.

Service: 1-800-263-2629; www.danby.com