Danby DAC060BBCWDB Air Conditioner Manual

The Danby DAC060BBCWDB is a 6000 BTU portable air conditioner designed for cooling small to medium-sized rooms. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidifier functions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a programmable timer.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Set your desired temperature easily
Multiple Fan Speeds	Customize airflow to your preference
Programmable Timer	Set the unit to turn on/off at specific times

Installation

Unpack and inspect contents. Place the air conditioner on a stable surface near a window.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach the hose to the air conditioner and window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the air conditioner; follow the on-screen prompts.

Select cooling mode: Use the mode button to choose between cooling, fan, and dehumidifier modes.
Set temperature: Adjust the thermostat to your desired setting.
Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 6000 BTU.
Energy Efficiency Ratio (EER): 12.0.
Air Flow: Adjustable fan speeds for optimal comfort.
Power Source: 115V AC, 60Hz.
Weight: Approximately 50 lbs.
Dimensions: 29.5 x 17.5 x 14.5 inches.

Controls and Settings

Access controls via the front panel or remote. Features include power, mode selection, temperature adjustment, and fan speed settings.

Remote: Power, mode, temperature, fan speed, timer.

Connecting Devices

Ensure the air conditioner is properly connected to the power source and window kit.

Turn off the unit before making any connections.
Ensure all connections are secure and properly fitted.

Tip: Regularly check connections for wear and tear.

Operating the Air Conditioner

Follow these steps to operate your air conditioner effectively.

Power on the unit: Press the power button on the remote or unit.
Select desired mode: Choose cooling, fan, or dehumidifier mode.
Adjust temperature: Use the thermostat to set your preferred temperature.
Monitor performance: Check the air filter and clean as needed.

WARNING! Do not block air intake or exhaust vents.

Accessibility Features

Remote control allows for easy operation from a distance, making it accessible for all users.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Ensure the unit is dry before plugging it back in.

Regulatory Information

Meets FCC Part 15 requirements for residential use. For support, visit www.danby.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect settings	Ensure unit is set to cooling mode.
Excessive noise	Loose parts	Check for loose components and secure.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 10 seconds to reset.

Service: Contact customer support for further assistance.